Sherwood R-772 When selecting the Auto Surround, When selecting the Audio Remaster

Page 46
: The optimum surround mode will be automatically selected depending on the signal format being input.
: You can select the desired of different surround modes selectable for the signal being input with using the MULTI CONTROL knob or the SURROUND MODE UP/DOWN ( >/< ) buttons. (For details, refer to "When selecting the manual surround mode with pressing the SURROUND MODE button on the front panel" on page 26.)

R-772(G)2007.9.174:43PM페이지46

ENGLISH

Continued

When selecting the AUTO SURROUND

• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.

ON

(Auto surround mode)

�

OFF

(Manual surround mode)

■Notes :

•Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround mode may vary depending on whether the speaker type is set to "NO" or not.

•When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.

When selecting the AUDIO REMASTER

•The remastering processes the input signal digitally and converts its digital sampling frequency to twice the current frequency (88.2/96 kHz) for a more detailed sound reproduction.

ON : To process the input signal digitally and to convert its sampling frequency to 88.2/96 kHz for a more

�detailed sound reproduction.

OFF : To turn off the remastering function. ■Note :

•The remastering function have no effect on the input digital signal from the 88.2/96 kHz source or higher as well as the digital signal that is output from the OPTICAL DIGITAL OUT of this receiver.

When selecting the AV SYNC

•There may be a slight time delay between the video and audio signals in case that some video playback equipments may process the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you can adjust the time delay of audio signals to synchronize the sound with the picture.

•The time delay can be adjusted within the range of 0 ~ 200 msec.

When selecting the DC TRIGGER

•To turn on the component connected to the DC TRIGGER OUT jack when this input source is selected, you should set the DC TRIGGER to ON for this input source.

OFF : To turn off the DC trigger function.

�

ON: To turn it on.

•For details, refer to "CONNECTING DC TRIGGER OUT" on page 8.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Audio/Video Receiver Read this Before Operating Your Unit Introduction220 240 Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connection *1 Connecting Audio Components Connecting External INSConnecting Subwoofer Preout Connecting Digital INS and OUTConnecting DC Trigger OUT Digital input default settingsSurround back speakers Connecting SpeakersFront Bi-Amp Connections Surround left and right speakers Speaker placementFront left and right speakers and center speaker Surround back left and right speakersConnecting Room 2 Outs Connecting PC for UpgradesSwitched AC Outlet Connecting MULTI-ROOM System KITAC Input Cord Front Panel Controls Fluorescent DisplaySetup MIC Jack AUX in JackUniversal Remote Controls Function Table of the Numbered Buttons Loading Batteries Using Functions of Remote Control Entering a setup codeUsing a punch-through function Removing a punch-through functionProgramming a macro function Operating a macro functionRemote Control Operation Range Room 2 Remote ControlsLoading Battery Listening to a Program Source When selecting the External in as desiredOperations Before operationListening with headphones When CD, AUX, Video 1~ 4 is selected as an input sourceMuting the sound Surround modes Dolby Virtual Speaker Reference Enjoying Surround Sound Dolby DIGITAL, Dolby VS REF, Dolby VS WideTo cancel the surround mode for stereo operation Listening in Dolby Headphone modeAdjusting each channel level with test tone 2CH downmix modeAdjusting the current channel level Select the desired channelMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsTuning to preset stations Manual presettingScanning preset stations in sequence RDS search Listening to RDS Broadcasts FM onlyTP search PTY search DisplayOther Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the audio informationRoom 2 Source Playback Recording Dubbing the audio and video signals separately onto VideoRecording with Tape Dubbing from video components onto VideoOSD Menu Settings Multi772G2007.9.17443PM페이지39 When selecting the items other than OSD Position Adjust Setting the System SetupWhen selecting the AMP Assign When selecting the Hdmi Audio OUT When selecting the Subwoofer ModeWhen selecting the Tone Control When selecting the Background When selecting the Cinema EQWhen selecting the Momentary OSD When selecting the OSD Position Adjust When selecting the items other than Name Setting the Input SetupWhen selecting the menu of page 2 or When selecting the Video Mode When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio AssignWhen selecting the AV Sync When selecting the Auto SurroundWhen selecting the Audio Remaster When selecting the DC TriggerWhen selecting the Name To resume its factory input source nameWhen selecting the Auto Setup Setting the Speaker / Room EQ SetupPreparations 772G2007.9.17443PM페이지49 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference Setting the Sound Parameter When selecting the Night ModeWhen selecting the Center Width control When selecting the Dolby Plii MusicWhen selecting the Panorama mode When selecting the Dimension controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker When selecting the Dolby Virtual Speaker Wide modeWhen selecting the Input Setting the Multi Room SetupWhen selecting the Room When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionSetup Code Table Inno HIT VCR Otto Verand DVD SAT AUX-TAPE/MD
Related manuals
Manual 79 pages 32.11 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents