Frigidaire FFEF3019MW Setting Oven Controls, Setting the clock, Setting a silent control panel

Page 14

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". It is recommended to always set the clock for the correct time of day before using the appliance.

To set the clock:

1.Press clock set once (do not hold keypad down).

2.Within 5 seconds, press and hold the or until the correct time of day appears in the display.

NOTE

The time of day cannot be changed when the oven or clean is active.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1.Press and hold timer on-offkeypad for 5 seconds until a tone sounds, " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press timer on- off keypad and hold for 5 seconds until a tone sounds. "12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

NOTE

Changing between continuous bake or the 12-Hour Energy saving modes will not change how the cooktop controls operate.

Changing oven temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit) temperatures by default when shipped from the factory.

To change the temperature to display °C (Celsius) or from °C to °F (control should not be set for bake or clean when setting this feature):

1.Press broil keypad. "— —" appears in the display.

2.Press and hold the until "HI" appears in the display.

3.Press and hold broil keypad until °F or °C appears in the display.

4.Press the or to change °F to °C or °C to °F.

5.Press any control keypad to return to normal operating mode.

NOTE

The temperature display (°F or °C) feature cannot be changed when the oven or clean is active.

Setting a silent control panel

A beep will sound each time a control keypad is pressed. If desired, the control may be programmed for silent operation.

Press and hold the start time keypad. After 7 seconds, the control will beep once then release keypad.

This will block the controls from sounding when a keypad is pressed in the future.

To turn the silent control panel feature off, press and hold start time keypad again for 7 seconds until the control beeps once.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Use&Care Contents Product Record and RegistrationTip Over Hazard Important Safety InstructionsDefinitions Important Instructions for Using Your Oven Important Safety Notice When flaming foods under a ventilating hood, turn the fan onRemoving, replacing & arranging racks Before Setting Oven ControlsOven vent location Types of oven racksBaking layer cakes with 1 or 2 oven racks On & hot surface indicator lightsAir circulation in the oven About the ceramic glass cooktopCookware material types Using proper cookwareTypes of cooktop elements Single radiant surface elements Setting Surface ControlsSuggested radiant surface element settings To operate the single radiant elementDual radiant surface elements some models To operate a dual radiant elementWith approximate setting for medium shown Home canning Read the Instructions Carefully Before Using the Oven Oven Control FunctionsChanging oven temperature display F or C Setting Oven ControlsSetting the clock Setting a silent control panelSetting controls lock Setting the minute timerTo change the oven temperature after bake has started Setting bakeSetting bake time and start time features To set bakeWhen the set bake time runs out Cont’dSetting quick bake To set Broil Setting broilSuggested broil settings table Operating the oven light Adjusting the oven temperatureTo adjust oven temperature Read before starting self-clean CleanClean When the self-clean cycle has completed Stopping or interrupting a self-clean cycleSetting a self-clean cycle Care & Cleaning Cleaning recommendation tableTo maintain the cooktop appearance Cooktop maintenanceCooktop cleaning Aluminum foil and oven liners cont’d Cooktop cleaning cont’dAluminum foil and oven liners Replacing interior oven lightTo replace oven door Removing and replacing the lift-off oven doorTo remove oven door Problem Solution Setting Oven Controls sectionBefore YOU Call Solutions to common problems Care & Cleaning section Page Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies
Top Page Image Contents