Frigidaire FFEF3019MS Stopping or interrupting a self-clean cycle, Setting a self-clean cycle

Page 22

CLEAN

Setting a self-clean cycle or a delayed start self-clean cycle

Setting a self-clean cycle

1.Remove all items from the oven, cooktop, and all oven racks from the oven and be sure the oven door is completely closed. Be sure the oven control displays the correct time of day and adjust if needed.

NOTE

To start a self-clean cycle immediately without delay, skip steps 2 & 3 in the instructions provided below.

2.Press the start time keypad. The ":" in the time of day display will flash.

3. Press and hold the

keypad to scroll to the time to

start a delayed self-clean cycle. Release the keypad when the desired start time is displayed.

4. Press the clean keypad. "---" appears in the display.

5. To start press the

or

keypad once. "3:00" will

appear in the display indicating that a 3 hour self-clean time is set. To change to a shorter 2 hour self-clean

time press the

keypad once ("2:00" will appear in

the display indicating a 2 hour clean time is desired).

IMPORTANT

Once the oven control is set for clean, the motor driven lock will begin to automatically lock the oven

door. The "door locked" indicator light will flash while

the oven door is locking. DO NOT open the oven door while this indicator light is flashing (allow about 15 seconds for the oven door to completely lock).

6."CLn" will appear in the oven display during the self- clean cycle and the "door locked" indicator light will remain ON until the self-cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the self-clean cycle has completed:

1.The time of day will appear in the oven display and the "clean" and "door locked" indicator lights will continue to glow.

2.Once the oven has cooled down for about 1 hour and the "door locked" light has turned off, the oven door may be opened.

Stopping or interrupting a self-clean cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle once it has been activated:

1.Press the clear off keypad.

2.Once the oven has cooled down (about 1 hour) and the "door locked" indicator light has turned off, the oven door may be opened.

3.If needed, the self-clean may be restarted.

CAUTION

•To avoid possible burns use care when opening the oven door after the self-cleaning cycle is finished. Stand to the side of the oven when opening the oven door to allow any hot air or steam to escape.

•DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the oven door after the self-cleaning cycle has completed. The oven may still be VERY HOT.

NOTES

•Whenever the clean feature is active you may check the amount of time remaining in the self-clean cycle by pressing the clean keypad once. Remember the oven door will not unlock until the range has cooled sufficiently. You will need to add about 1 hour to the time displayed before you can use the oven for cooking again.

•After the oven has completely cooled and the oven door has unlocked, wipe away any residue or powdered ash from the oven interior using a damp cloth or paper towel.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Use&Care Contents Product Record and RegistrationDefinitions Important Safety InstructionsTip Over Hazard Important Instructions for Using Your Oven Important Safety Notice When flaming foods under a ventilating hood, turn the fan onRemoving, replacing & arranging racks Before Setting Oven ControlsOven vent location Types of oven racksBaking layer cakes with 1 or 2 oven racks On & hot surface indicator lightsAir circulation in the oven About the ceramic glass cooktopTypes of cooktop elements Using proper cookwareCookware material types Single radiant surface elements Setting Surface ControlsSuggested radiant surface element settings To operate the single radiant elementDual radiant surface elements some models To operate a dual radiant elementWith approximate setting for medium shown Home canning Read the Instructions Carefully Before Using the Oven Oven Control FunctionsChanging oven temperature display F or C Setting Oven ControlsSetting the clock Setting a silent control panelSetting controls lock Setting the minute timerTo change the oven temperature after bake has started Setting bakeSetting bake time and start time features To set bakeWhen the set bake time runs out Cont’dSetting quick bake Suggested broil settings table Setting broilTo set Broil To adjust oven temperature Adjusting the oven temperatureOperating the oven light Clean CleanRead before starting self-clean Setting a self-clean cycle Stopping or interrupting a self-clean cycleWhen the self-clean cycle has completed Care & Cleaning Cleaning recommendation tableCooktop cleaning Cooktop maintenanceTo maintain the cooktop appearance Aluminum foil and oven liners cont’d Cooktop cleaning cont’dAluminum foil and oven liners Replacing interior oven lightTo remove oven door Removing and replacing the lift-off oven doorTo replace oven door Problem Solution Setting Oven Controls sectionBefore YOU Call Solutions to common problems Care & Cleaning section Page Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies
Top Page Image Contents