Sherwood R-956 manual Digital Audio Recording with

Start recording on the VIDEO 1.

3

Start play on the VIDEO 2 and the CD

4 respectively.

The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers. Note: Be sure to observe the order of the above steps

1 and 2.

ENGLISH

DIGITAL AUDIO RECORDING WITH

When the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of an MD or CD recorder, you can enjoy high-quality sound of digital recording, without converting the original signals. Refer to “CONNECTING AUDIO COMPONENTS” and “CONNECTING VIDEO COMPONENTS” on pages 5 and 6 and the operator’s manual of the MD or CD reocrder.

Notes:

Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.

In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.

1	Select a desired input of CD, TAPE				2	Select the desired digital input for the
	MONITOR and VIDEO 1~VIDEO 4 as a					recording signal input.
	recording source.						DIGITAL/ANALOG
				PWR
		1	2	3
		4	5	6
	INPUT SELECTOR	7	8	9
			0
AUDIO	VIDEO TAPE MON.
		VOL		CH LEVL
			ENTER	CDTAPE MON	Each time this button is pressed, the corresponding
	or
				VID SEL	input is selected as follows;
					DIGITAL		ANALOG
		HOME THEATER MASTER
			RNC-30
					Note: When the selected digital input is not connected,
					“DIGITAL” is flickering, meaning no recording
					as well as no sound.
	Start recording on the component				4	Start play on the desired input.
3 connected to OPTICAL DIGITAL OUT.

2 7