Sherwood R-956 manual Other Functions

OTHER FUNCTIONS

Checking the settings corresponding to				Compressing the dynamic range
each operation				(Dolby Digital mode only)
				This function compresses the dynamic range of
				previously specified parts of the Dolby Digital sound
		CHECK		track(with extremely high volume)to minimize the
				difference in volume between the specified and non-
				specified parts.
				This makes it easy to hear all of the sound track when
				watching movies at night at low levels.
						DYNAMIC
						RANGE
Each time this button is pressed, the setting changes
and disappears in 2 seconds as follows;
	Input	Surround mode	Tone Channel level
	Room 2	Dynamic range	Cinema EQ Volume level	Each time this button is pressed, the mode changes
The channel level settings are displayed according to				and disappears in 3 seconds as follows;
the speaker settings.					DYNAMIC : 0.0 : Off
If the CHECK button is pressed for more than 2
seconds, the settings are displayed continuously and					DYNAMIC : 0.5 : Low compression
repeatedly.
In this case, pressing any button will cancel the					DYNAMIC : 1.0 : High compression
check function.
				In some Dolby Digital software, this function may
				not be available.

Operating the sleep timer			Adjusting the brightness of the
			fluorescent displays
The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting off.
To set the receiver to automatically turn off after the					PWR
specified period of time.			7	8	9
			1	2	3
			4	5	6
				0
		PWR	VOL		CH LEVL
1	2	3
4	5	6		ENTER
7	8	9
SLEEP	0
					SYS DISP
			HOME THEATER MASTER
				RNC-30
HOME THEATER MASTER
	RNC-30
Each time this button is pressed, the sleep time			Each time this button is pressed, the brightness of
changes and disappears in 3 seconds as follows;			all fluorescent displays of Sherwood components
10 20 30 60		90 OFF	connected by the DIGI LINK III changes together
Unit : minutes			as follows;
While operating the sleep timer, “SLEEP” lights up.			ON dim OFF
When the sleep time is selected, all display panels of			In the display OFF mode, pressing any button will
Sherwood components connected by the DIGI LINK
			restore the display ON mode.
III are dimly lit.

2 9

ENGLISH