Frigidaire Dual Fuel Range Slide-in Models Cleaning the Cooktop, Burner Heads, Caps & Grates

Page 16

Care & Cleaning

Cleaning the Cooktop, Burner Heads, Caps & Grates

The cooktop is designed to make cleaning easier. Because the gas Burners are sealed, cleanups are easy when spillovers are cleaned up immediately.

The cooktop, Burner Heads and Caps should be routinely cleaned. Keeping the Burner Head Ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions:

THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.

Use caution when replacing the Burner Caps so the Electrodes are not damaged. This may cause a delayed ignition or prevent the burner from igniting.

Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be made by authorized servicer.

To Remove and Replace the Surface Burner Caps and Burner Heads - Remove in the following order: (1st) surface Burner Grates, (2nd) Burner Caps and (3rd) Burner Heads. Reverse the procedure above to replace the surface Burner Caps, Burner Heads and Burner Grates.

Do not remove any parts from the cooktop until they have completely cooled and are safe to handle. Do not operate the surface Burners without the Burner Caps and Burner Heads properly in place.

To Clean the surface Burner Caps and Burner Heads- Use a soap-filled scouring pad or a mild abrasive cleanser to clean the surface Burner Caps and Burner Heads. The ports (or slots) around the Burner Heads must be routinely cleaned. If residue still remains in these ports, use a small-gauge wire or needle to clean the slots or holes. For proper flow of gas and ignition of the burner—DO NOT

ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO

ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface

Burner Caps and Burner Heads in place whenever the gas Burners are in use.

To Clean the Burner Grates- The Burner Grates are dishwasher safe and may be cleaned in the dishwasher. Remove any excessive soils before placing in the dishwasher.

To Clean the Cooktop and contoured areas of the Cooktop- If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry. Do not use harsh abrasive cleaners on the cooktop. They can scratch the pocelain. Completely rinse any mild cleaners used from the surface or the porcelain cooktop may become damaged during future heating. DO NOT use spray oven cleaners on the cooktop.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Before Setting Welcome10-11 Before You CallWelcome & Congratulations Questions?Versión en español Register Your ProductFor Your Safety Important Safety InstructionsWhat to do if YOU Smell GAS Important Instructions for Usingyour Cooktop Conversion to Liquefied Petroleum Gas or L.P. Gas Features At a Glance Before Setting Surface Controls Control Locations of the Gas Surface BurnersRemember do not Allow SPILLS, Food 14K or 12KSetting Surface Controls Setting Proper Surface Burner Flame SizeOperating the Gas Surface Controls Flame Size Type of CookingBefore Setting Oven Controls Arranging Oven RacksRemoving and Replacing Oven Racks Oven VentSetting Warm & Serve Drawer Controls some models Using the Warm & Serve DrawerAir Circulation in the Oven Arranging Warm & Serve Drawer Rack PositionsSetting Oven Controls Warm & Serve Drawer Temperature SelectionTo Set the Warm & Serve Drawer Controls Food ItemCooking Informations Oven BakingBroiling Care & Cleaning Self-CleaningTo Set the Self-Clean Cycle Self-Cleaning OvenSurfaces How to Clean Control PanelsStainless Steel some models Oven door & drawer front panel Easier into the rack positionsCleaning the Cooktop, Burner Heads, Caps & Grates Allow SPILLS, FOOD, Cleaning Agents or ANY Other Material toRemoving and Replacing the Oven Door Hinge Slot Door re- moved from the oven FigureLock in normal position To Remove Oven DoorRemoving and Replacing Warm & Serve Drawer To Remove Warm & Serve DrawerAdjusting Your Oven Temperature Place When the Oven is in USEChanging Oven Light To Remove the Hidden Bake Cover some modelsBefore you call Range is not levelEntire range or oven does not operate Surface burner flame burns half way aroundSelf-cleaning cycle does not work Soil not completely removed after self- cleaning cycleSurface burner flame is orange Poor baking resultsMajor Appliance Warranty Information Exclusions
Top Page Image Contents