Frigidaire pmn important safety instructions To Start the Self-Clean Cycle Control Style

Page 16

Oven Control Styles 1 or 2 - Self Cleaning Oven

Control Style 1

Control Style 2

Note: If the oven is set to bake or broil, and then the Temperature Control Knob is set to CLEAN, it will not start the clean cycle until START is pressed again.

Use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

To Start the Self-Clean Cycle - Control Style 1

The oven is programmed to run a 3 hour self-clean cycle.

1.Be sure the oven door is closed.

2.Turn Temperature Control Knob to CLEAN.

3.Push .

4.If the door is left open, the "LOCK" indicator light will flash, but the lock motor and clean cycle will not start. As soon as the controls are set and the door is closed, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

When the Self-Clean Cycle is Completed (Control Style 1)

1.The "LOCK" indicator light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone completely out (and is not flashing), the oven door can be opened.

To Start the Self-Clean Cycle - Control Style 2

The oven can be programmed to run a 2 or 3 hour self-clean cycle. We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

1.Be sure the oven door is closed.

2.Turn Temperature Control Knob to CLEAN.

3.Push . "3:00" will appear in the display. (The oven will automatically program a 3 hour clean cycle.)

4.If you want a 2 hour clean cycle, press . "2:00" will appear in the display.

5.If the door is left open, the "LOCK" indicator light will flash and "dr" will glow in the display, but the lock motor and clean cycle will not start. As soon as the controls are set and the door is closed, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. "CLn" will appear and remain in the display until the cleaning cycle is completed or cancelled. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.Pressat any time during the self-clean cycle to review remaining

cleaning time.

When the Self-Clean Cycle is Completed (Control Style 2)

1.The time of day will appear in the display window and the "LOCK" indicator light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone completely out (and is not flashing), the oven door can be opened.

Stopping or Interrupting a Self-Cleaning Cycle ( Control Style 1 or 2)

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire:

1.Turn Temperature Control Knob to OFF.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone completely out (and is not flashing), the oven door can be opened.

3.Correct the condition which caused the smoking.

4.Restart the self-cleaning cycle once all conditions have been corrected.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Electric Range Product Registration Register Your ProductVersión en español Record Your Model and Serial NumbersImportant Safety Instructions Important Instructions for Using Your Cook TOP Indicator Lights Surface Cooking for Models with a Ceramic- Glass Cook TopCeramic-Glass Cooktop Radiant Surface UnitsSetting Surface Controls for Models with Radiant Elements Setting Type of CookingTo Operate Radiant Surface Unit To Operate Dual Radiant Surface Unit If equippedSetting Warm Zone To Operate the Warm ZoneSetting Warmer Drawer Oven Vent Location Before Setting Oven ControlsArranging Oven Racks Start Indicator LIGHT-Flashes Oven Control Styles 1 or 2 Control Pad FunctionsControl Style Stop Time PAD- Used to setSetting the Clock Minute Timer To Set the Minute Timer Clock StyleOven Control Style To Set the Clock StyleOven Control Style 1 or 2 Bake To Set the Controls for Normal BakingOven Control Style 2 Automatic Timer For a Delayed Start Time and Automatic Shut-OffWhen the Set Bake Time Runs Out To Begin Baking Immediately with an Automatic Shut-OffOven Control Styles 1 or 2 Broil Clock StyleClock Style To Broil Control Style 1 or Rack Position From Top FoodSelf-Cleaning Oven Oven Control Styles 1 or 2 Self Cleaning OvenAdhere to the following cleaning precautions To Start the Self-Clean Cycle Control Style When the Self-Clean Cycle is Completed Control StyleCleaning Various Parts of Your Range General CleaningSurfaces How to Clean Ceramic-Glass Cooktop Cleaning Daily CleaningFor normal soil For heavy, burned-on soilTo Remove and Replace Oven Door To Remove and Replace Warmer Drawer if equippedTo Change the Oven Light some Self Cleaning Models Changing Cooktop and/or Oven LightsTo Change the Cooktop Light some models If equippedOven Control Style 1 or 2 Customizing Your Oven Performance To Adjust Oven Temperature Control StyleControl Style Avoid Service Checklist Self-cleaning cycle does not work Cleaning cyclePoor baking results Flames inside oven or smoking from ventRange Warranty
Top Page Image Contents