Frigidaire pmn Oven Control Style 1 or 2 Customizing Your Oven Performance

Page 21

Oven Control Style 1 or 2 - Customizing Your Oven Performance

Note: The adjustments made will not change the self-cleaning temperature.

Control Style 1

Control Style 2

The temperature in the oven has been set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

To Adjust Oven Temperature - Control Style 1

1.With the dial set to OFF, press and hold for 30 seconds until a single beep is heard.

2.Within 5 seconds, turn the Temperature Control Knob clockwise to either the High (HI) or Low (LO) Broil setting. Select High Broil (HI) to increase the temperature or Low Broil (LO) to decrease the temperature.

3.The temperature can be adjusted up or down 35°F, in 5°F steps, by pressing START. Adjust until the desired amount of offset is indicated by the indicator lights as follows:

A flashing "OVEN" indicator light indicates a positive offset, while a flashing "LOCK" indicator light indicates a negative offset. The lights will flash once for each 5°F of offset. If no light is flashing, the oven control has the original factory calibration, and the offset is 0°F. Example: If the OVEN indicator light is flashing three times and then pauses, the offset is +15°F.

4.When you have made the desired adjustment, turn the Temperature Control Knob to OFF.

To Adjust Oven Temperature - Control Style 2

1.With the dial set to OFF, press and hold for 30 seconds until a single beep is heard.

2.Within 5 seconds, turn the Temperature Control Knob clockwise to either the High Broil (HI) or Low Broil (LO) setting.

3.The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "00."

4.The temperature can now be adjusted up or down 35°F, in 5°F steps, by

pushing and holding or . Adjust until the desired amount of offset appears in the display.

5.When you have made the desired adjustment, turn the Temperature Control Knob to OFF.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Electric Range Register Your Product Product RegistrationVersión en español Record Your Model and Serial NumbersImportant Safety Instructions Important Instructions for Using Your Cook TOP Surface Cooking for Models with a Ceramic- Glass Cook Top Indicator LightsCeramic-Glass Cooktop Radiant Surface UnitsSetting Type of Cooking Setting Surface Controls for Models with Radiant ElementsTo Operate Radiant Surface Unit To Operate Dual Radiant Surface Unit If equippedTo Operate the Warm Zone Setting Warm ZoneSetting Warmer Drawer Before Setting Oven Controls Oven Vent LocationArranging Oven Racks Oven Control Styles 1 or 2 Control Pad Functions Start Indicator LIGHT-FlashesControl Style Stop Time PAD- Used to setTo Set the Minute Timer Clock Style Setting the Clock Minute TimerOven Control Style To Set the Clock StyleTo Set the Controls for Normal Baking Oven Control Style 1 or 2 BakeFor a Delayed Start Time and Automatic Shut-Off Oven Control Style 2 Automatic TimerWhen the Set Bake Time Runs Out To Begin Baking Immediately with an Automatic Shut-OffClock Style Oven Control Styles 1 or 2 BroilClock Style To Broil Control Style 1 or Rack Position From Top FoodOven Control Styles 1 or 2 Self Cleaning Oven Self-Cleaning OvenAdhere to the following cleaning precautions When the Self-Clean Cycle is Completed Control Style To Start the Self-Clean Cycle Control StyleGeneral Cleaning Cleaning Various Parts of Your RangeSurfaces How to Clean Daily Cleaning Ceramic-Glass Cooktop CleaningFor normal soil For heavy, burned-on soilTo Remove and Replace Warmer Drawer if equipped To Remove and Replace Oven DoorChanging Cooktop and/or Oven Lights To Change the Oven Light some Self Cleaning ModelsTo Change the Cooktop Light some models If equippedTo Adjust Oven Temperature Control Style Oven Control Style 1 or 2 Customizing Your Oven PerformanceControl Style Avoid Service Checklist Cleaning cycle Self-cleaning cycle does not workPoor baking results Flames inside oven or smoking from ventRange Warranty
Top Page Image Contents