Frigidaire FGEF306TMF Setting the Clock, Changing Between 12 or 24 Hour Time of DAY Display

Page 15

SETTING THE CLOCK

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press SET CLOCK. “CLO” will appear in the display.

2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.

3.Press START. “CLO” will disappear and the clock will start.

CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY

1.Press and hold SET CLOCK for 6 seconds. “CLO” will appear in the display.

2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.

3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.

4.Press START to accept the change or press CANCEL to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

SETTING OVEN CONTROLS

SETTING CONTINUOUS BAKE OR 6 HOUR ENERGY SAVING

The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear in the display and the control will beep once.

2.Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for the 6 Hour Energy Saving mode and “StAY On” indicates the control is set for the Continuous Bake feature.

3.Press START to accept the change (display will return to time of day) or press CANCEL to reject the change.

SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:

The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “FAhrnht” appears, the display is set to show temperatures in Fahrenheit. If “CELSIUS” appears, the display is set to show temperatures in Celsius.

2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “FAhrnht” or “CELSIUS”.

3.Press START to accept the change or press CANCEL to reject the change.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Use &Care Welcome & Congratulations Register Your ProductPlease Carefully Read and Save These Instructions Definitions Important Safety InstructionsImportant Instructions for Using Your Cooktop For Glass Cooktop only Important Safety Instructions for Using Your OvenImportant Safety Instructions for Cleaning Your Oven Save These Instructions for Future ReferenceYour BUILT-IN Range Features Features AT a GlanceBefore Setting Surface Controls Surface Cooking SettingsElectronic Surface Element Control Esec Cookware material types Using Proper CookwareAbout the Radiant Surface Elements About the Ceramic Glass SurfaceSetting Surface Controls Single Radiant Surface ElementsTo Operate the Single Radiant Surface Elements To Operate the Dual Surface Element Dual Surface Radiant ElementKeep Warm Zone Keep warm zone recommended food settings table Food Item Oven vents location Before Setting Oven Controls Arranging Oven Racks AIR Circulation in the OvenControl PAD Features Setting Oven ControlsBAKE, Convection BAKE, Convection Roast and Pizza Minimum and Maximum Control PAD SettingsTemperature Visual Display Feature Minimum TEMP. /TIME Maximum TEMP. /TIMEChanging Between 12 or 24 Hour Time of DAY Display Setting the ClockSetting Continuous Bake or 6 Hour Energy Saving Setting Temperature Display Fahrenheit or CelsiusSetting ADD 1 Minute Feature Setting Lockout FeatureSetting Silent Control Operation Setting TimerTo set the Bake Temperature to 375F Setting Quick PreheatSetting Bake To set the quick preheat with an oven temperature of 375FSetting Convection Bake Upper oven only Convection Baking TipsBenefits of Convection Bake Convection Roasting Tips Setting Convection Convert Upper oven onlySetting Convection Roast Upper oven only To set a Convection Roast Temperature of 375FBAKE, Convect BAKE, Bake Time and Delay Setting Bake TimeSetting Delay Start When the timed bake finishesSetting Broil CancelBroiling Tips Setting Pizza Setting Chicken NuggetsTo set Keep Warm to turn on automatically Setting Keep WarmKeep Warm Tips To set Keep WarmOven will turn on and begin heating Oven Light Adjusting Oven TemperatureWhat to Expect during Cleaning SELF-CLEANINGSELF-CLEANING Adhere to the following cleaning precautionsSetting SELF-CLEAN Cycle Time Length When the Self-Clean Cycle is CompletedStopping or Interrupting a Self-Cleaning Cycle Surfaces How to Clean Cleaning Various Parts of Your ApplianceFor light to moderate soil Care & CleaningCeramic Glass Cooktop Cleaning & Maintenance Cleaning Recommendations for the Ceramic Glass CooktopCare and Cleaning of Stainless Steel Changing Oven LightBe Sure Oven is Cool Removing and Replacing the LIFT- OFF Oven Door To Remove Oven DoorTo Replace Oven Door Oven Baking Occurrence Possible CAUSE/SOLUTION Abrasions on Self-cleaning cycleSoil not completely removed after self- cleaning cycle Scratches orPage Major Appliance Warranty Exclusions This warranty does not cover the followingDisclaimer of Implies Warranties Limitation of Remedies
Top Page Image Contents