Sherwood RD-6108 manual When CD, Video 1~3 is selected as an, Input source

When CD, VIDEO 1~3 is selected as an		7	To compensate for edgy or shrill movie
input source			sound tracks.
4	Select the digital or analog input		CINEMA EQ
	connected as desired.
	DIGITAL
	INPUTS

		Then “C-EQ ON” is displayed.
Each time this button is pressed, the corresponding		Press it again to cancel, the “C-EQ OFF” is
input is selected as follows ;		displayed.
o(ptical) 1 c(oaxial) 1 c(oaxial) 2		When the 6 CH DIRECT is selected as an input
	A(nalog)	source, the cinema EQ function does not work.
To listen to a DTS or Dolby Digital program source
in the 2-CH downmix mode, in the stereo mode, the			To mute the sound.
corresponding digital input should be selected. (For		8
details, refer to “Downmixing into 2 front channels”
on page 18.)			1	2	3
			4	5	6
Notes :			7	8	9
				0
When the selected optical or coaxial digital input is					MUTE
not connected, the selected digital input display is
flickering, meaning no sound. (Refer to
“ENJOYING SURROUND SOUND” on page 15.)
The sound from the component connected to the
selected digital input can be heard regardless of the		“MUTE” will flicker.
selected input source.		To resume the previous sound level, press it again.
5	Operate the selected component for	9	To listen with the headphones.
	playback.
			PHONES

When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 15.

6	Adjust the (overall) volume.
					Ensure that the SPEAKER button is set to off.
					When listening to a DTS or Dolby Digital program
					source, if the headphones are plugged in and the
					SPEAKER button is set to off, it enters the 2-CH
	MASTER VOLUME	1	2	3	downmix mode automatically. (For details, refer to
		7	8	9
		4	5	6	“Downmixing into 2 front channels”on page 18.)
			0	MASTER VOLUME
		or
DOWN		UP

ENGLISH

11