Sherwood RD-6108 manual Listening to Radio Broadcasts, Auto tuning, Manual tuning

LISTENING TO RADIO BROADCASTS

Auto tuning				2	Select the desired band.
Select the tuner.
1					BAND
						MHz
	1	2	3
AUDIO	4	5	6
	7	8	9	TUNER
		0			BAND	FREQUENCY
	or			Each time this button is pressed, the band is changed
				to FM or AM.
				When pressing the BAND button without selecting
				the TUNER, the tuner will be selected automatically.
Select the tuning mode.				4	Press the TUNING/PRESET UP( ) or
3	T/P MODE				second.DOWN( ) button for more than 0.5
					TUNING/PRESET

Each time this button is pressed, the mode changes		The tuner will now search until a station of
as follows;		sufficient strength has been found. The display
	Tuning mode : “PRESET” goes off.	shows the tuned frequency and “TUNED”.
	Preset mode : “PRESET” lights up.	If the station found is not the desired one, simply
		repeat this operation.
		Weak stations are skipped during auto tuning.

Manual tuning

Manual tuning is useful when you already know the frequency of	TUNING/PRESET
the desired station.
Perform the steps 1 to 3 in “Auto tuning” procedure and press the
TUNING/PRESET UP( ) or DOWN( ) button repeatedly until
the right frequency has been reached.

ENGLISH

Presetting radio stations

You can store up to 30 preferred stations in the memory.

1	Tune in the desired station with auto or
	manual tuning.

Press the MEMORY/ENTER button.

2

MEMO/ENTER

“MEM” is flickering for 5 seconds.

19