Other Functions, Operating the sleep timer

ENGLISH

Start recording on the VIDEO 1.

Start play on the VIDEO 2 and the CD

4 respectively.

The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers.

Note : Be sure to observe the order of the above steps 1 and 2.

OTHER FUNCTIONS

Compressing the dynamic range (Dolby Digital sources only)

This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easier to hear all of the sound track when watching movies at night at low levels.

When the digital signals from Dolby Digital program source are input in available surround mode.

DYNAMIC

RANGE

Each time this button is pressed, the mode changes and disappears in 3 seconds as follows:

DYNR 0.0 : Off

DYNR 0.5 : Low compression

DYNR 1.0 : High compression

In some Dolby Digital software, this function may not be available.

Operating the sleep timer

The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.

To set the receiver to automatically turn off after the specified period of time.

1	2	3	SLEEP
4	5	6
7	8	9
	0

Each time this button is pressed, the sleep time changes and disappears in 3 seconds as follows;

10 20 30 60 90 OFF Unit : minutes

While operating the sleep timer, “SLEEP” lights up.

Adjusting the brightness of the fluorescent displays

DISPLAY	1	2	3
	4	5	6
	7	8	9
		0

Each time this button is pressed, the brightness of fluorescent display changes as follows;

ON dim OFF

In the display OFF mode, pressing any button will restore the display ON mode.