Sherwood RD-6500 manual When CD, Video 1~3 is selected as an, Input source

When CD, VIDEO 1~3 is selected as an		7	To compensate for edgy or shrill movie
input source			sound tracks.
4	Select the digital or analog input		CINEMA EQ
	connected as desired.
	DIGITAL
	INPUTS

			• Then “C-EQ ON” is displayed.
• Each time this button is pressed, the corresponding			• Press it again to cancel, the “C-EQ OFF” is
input is selected as follows ;			displayed.
	o(ptical) 1 c(oaxial) 1 c(oaxial) 2		• When the 6 CH DIRECT is selected as an input
			source, the cinema EQ function does not work.
		A(nalog)

•To listen to a Dolby Digital program source in the 2- CH downmix mode, in the stereo mode, the

corresponding digital input should be selected. (For	8	To mute the sound.
details, refer to “Downmixing into 2 front channels”
on page 19.)
Notes :		41	52	63
		7	0	9
			8
• When the selected optical or coaxial digital input is				MUTE
not connected, the selected digital input display is
flickering, meaning no sound. (Refer to
“ENJOYING SURROUND SOUND” on page 15.)

•The sound from the component connected to the selected digital input can be heard regardless of the

selected input source.		• “MUTE” will flicker.
		• To resume the previous sound level, press it again.
	Operate the selected component for	To listen with the headphones.
5	playback.	9
		PHONES

• When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 15.

6	Adjust the (overall) volume.				• Ensure that the SPEAKER button is set to off.
					• When listening to a Dolby Digital program source, if
					the headphones are plugged in and the SPEAKER
					button is set to off, it enters the 2-CH downmix
	MASTER VOLUME	1	2	3	mode automatically. (For details, refer to
		4	5	6
		7	8	9	“Downmixing into 2 front channels”on page 19.)
			0	MASTER VOLUME
		or
DOWN		UP

ENGLISH

11