Enjoying Surround Sound

•Surround sound effect will not work properly if the signal passes through a graphic equalizer.

Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.

ENGLISH

Depending on the input digital signal format, select the desired decoding mode.

AUTO

•Each time the AUTO button is pressed, the decoding mode changes as follows:

IN-AUTO : The input digital signal format(Dolby Digital or PCM(2 channel stereo), etc.)

used by the selected digital input source is detected automatically to perform the necessary decoding process for optimum surround modes.

IN-PCM : The PCM signal processing is performed only when PCM signals are input.

Notes:

•Only when the digital input is selected as signal input for the input sources except TUNER, AUX and TAPE MONITOR, the decoding mode can be selected.

Select the desired surround mode.

2	DSP MODE
	DSP MODE

•Each time the DSP MODE button is pressed, the surround mode changes depending on the input signal format and the selected decoding mode as follows:

When Dolby Digital signals are input in the IN-AUTO mode, one of the following modes can be selected depending on the number of the recorded channels.

•Dolby Digital 5.1-channel sources: DOLBY DIGITAL

•Dolby Digital 2-channel sources: DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II MUSIC, DOLBY PRO LOGIC II MATRIX and DOLBY PRO LOGIC II CUSTOM

When PCM(2 channel stereo) signals are input in the IN-AUTO or IN-PCM mode, one of the following modes can be selected :

DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II MUSIC,

DOLBY PRO LOGIC II MATRIX, DOLBY PRO LOGIC II CUSTOM, MATRIX, CHURCH, THEATER,HALL and

STADIUM.

•When the analog input is selected as signal input and analog stereo signals are input, you can select the desired of these above surround modes, too.

Notes:

•When the selected decoding mode is not matched to the input signal format, no sound is heard. Therefore, be sure to select the required decoding mode and the available surround mode according to the input signal format.

•When the 6 CH DIRECT is selected as an input source, the decoding and surround modes cannot be selected.