DeLonghi DL 48 P6E manual Abnormal Situations AND/OR Operation Problems

Page 23

ABNORMAL SITUATIONS AND/OR OPERATION PROBLEMS

during cooking or the self cleaning cycle.

1.30 F0 or 30 F1 appear during the cooking or self cleaning cycle

Oven temperature sensor broken or not working properly. The cooling fan stays on and if the self cleaning cycle is in progress the door remains locked.

What to do:

1.Turn the oven function selector to OFF (oven OFF). A 30 minute countdown will start. If the selector is turned and then returned to OFF the count will start again from 30.

2.Wait for the countdown to finish.

The fan switches off and the door, if locked, unlocks.

3.Disconnect the range from the mains and contact the After-Sales Service Centre because the oven can no longer be used.

Caution: If the function selector is not turned to OFF (oven OFF), the cooling fan will continue to work and the oven door, if locked, remains locked.

2.F0.00 appears during the self cleaning cycle

This indicates a temperature sensor measurement error during the self cleaning cycle. This may be due to the self cleaning cycle being stopped and started again when it was quite a way through.

What to do:

1.Turn the oven selector knob to OFF (oven OFF).

2.Wait for at least 15 minutes before repeating the operations to start the self clean- ing cycle.

3.If the message is still given after several attempts call the After-Sales Service.

3.Display OFF - Oven not working properly.

What to do:

1.Turn the function selector to OFF (oven OFF)

2.Wait for the oven to cool down completely so that the door opens

3.Switch the range off for a few seconds.

If after this procedure the display is still off:

4.Disconnect the range from the mains.

5.Call the Service Centre. The range must not be used.

I

I

I

I

I

I

I

 

I

I

II

23

Image 23
Contents Dual Fuel Self Cleaning Range ALL Ranges can TIP Dear Customer Electrical Grounding Instructions Replacement PartsImportant Precautions and Recommendations Cooking HOB FeaturesControls Description GAS Burners Rapid and triple ring How to use the top burnersPage GAS Burners Dual Position Correct USE of Dual Burners .6a 2.6b Choice of Burner figTo USE the Warming Drawer How to use the warmer drawerGeneral Features Using the Warming Drawer for the First TimeMoisture Selector fig Temperature SelectorUsing the Ovens for the First Time How to use the self cleaning ovensOven Light this is not a cooking function Selecting the Functions figTraditional Convection Cooking Important Notes Turn the oven selector knob to a cooking function i.e. Bake Selecting F/C on the DisplayHOW to Start the Self Cleaning Cycle Steady door Problems on Starting and During the Self Cleaning CycleIf the oven cavity temperature is higher than 570 F 300 C HOW to Stop the Self Cleaning CycleDuring cooking or the self cleaning cycle Abnormal Situations AND/OR Operation ProblemsCooking Different Dishes AT the Same Time Cooking Advice SterilizationRegeneration RoastingStep Broiling Audible Signal How to use the electronic programmerSetting the Time SEMI-AUTOMATIC Cooking TimerAutomatic Cooking Examples of Programming Automatic Cooking Cancelling a SET ProgrammeCleaning and maintenance Correct Position of Triple Ring Burners Correct Replacement of the Rapid BurnersGAS Valves Oven Shelf Installation and RemovalCorrect Position of Dual Burners Fitting the Warmer Drawer fig Removing the Warmer Drawer figRemoving the Oven Door Replacing the Oven Light figDO’S and do NOT’S For Your SafetyCod ß4