Using the surface units. | ge.com |
Throughout this manual, features and appearance may vary from your model.
Safety
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F.
Indicator light will:
■come on when the unit is turned on or hot to the touch.
Instructions
Be sure you turn the control knob to OFF | ■ stay on even after the unit is turned off. |
when you finish cooking. | ■ glow until the unit is cooled to approximately 150°F. |
|
Dual Surface Unit (on some models)
The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.
To use the small surface unit, push in the SMALL BURNER portion of the switch above the control knob.
To use the large surface unit, push in the LARGE BURNER portion of the switch above the control knob.
Dual Surface Unit Control Knob (on some models)
The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.
To use the small surface unit, turn the control knob to the SMALL BURNER settings.
To use the large surface unit, turn the control knob to the LARGE BURNER settings.
Operating Instructions Care and Cleaning Troubleshooting
BURNER
SIZE 9"
6" 
12"
OFF
Tri-Ring Surface Element (on some models)
The rear center surface element offers 3 cooking areas to match the size of the cookware you
are using.
To use the largest cooking area, push in and turn the SELECTOR knob to 12″ . Push and turn the control knob to the desired setting.
To use the medium cooking area, press and turn the SELECTOR knob to 9″ .
Push down and turn the control knob to the desired setting.
To use the smallest cooking area, turn the SELECTOR knob to 6″ . Push and turn the control knob to the desired setting. This will activate only the smallest inside heating area.
Tips Consumer Support
7