GE RGB744, EGR2000, LGB356 manual Oven CONTROL, Clock and Timer

Page 11

OVEN CONTROL, CLOCK AND TIMER

Automatic Clock

To Set the Clock

The clock must be set for the automatic oven timing

1.

Press the CLOCK pad.

functions to work properly. The time of day cannot be

2.

Press the HOUR and MIN. pads to set

changed during a Timed Baking or Self-Cleaning cycle.

the time of day.

 

 

 

 

Features of

Timer

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 11 hours and 59 minutes.

To Set the Timer

1.Press the TIMER

ON/OFF pad.

2.Press the HOUR and MIN. pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.

To Reset the Timer

If the display is still showing the time remaining, you may change it by pressing the HOUR and MIN. pads until the time you want appears in the display.

If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the HOUR and MIN. pads until the new time you want shows on the display.

Your Oven Control

To Cancel the Timer

End of Cycle Tones (on some models)

To cancel the timer, the remaining time must be in

The end of cycle tone can be cleared by pressing the

the display. To recall the time remaining, press the

TIMER ON/OFF pad or, on some models, by

TIMER ON/OFF pad once. To cancel the timer press

pressing the COOK TIME ON/OFF pad depending

the TIMER ON/OFF pad again.

on which function you are using.

 

 

Power Outage

On some models, after a power outage the oven will automatically resume its setting once the power is restored.

For models with a CLOCK pad, when the power is restored the display will flash the time of day until a pad is pressed or the knob is turned. Reset the clock to the correct time of day.

If the oven was in operation when the power outage occurred, the Oven Set knob must be turned back to OFF. Then reset the knob to the way it was before the power outage.

If your model has a COOK TIME ON/OFF pad and your oven was set for timed baking or roasting when the power outage occurred, the clock and all programmed functions must be reset. To reset them, first turn the Oven Set knob back to OFF, reset the clock, functions and knob back to the way they were before the power outage.

Oven Set Knob

The Oven Set knob maintains the temperature you set from WARM (170°F.) to BROIL (550°F.).

It also has an OFF and a CLEAN setting.

Appearance may vary.

The PREHEATED light glows when the oven reaches your selected temperature.

The OVEN ON light will glow any time the Oven Set knob is not in the OFF position and is set on a temperature or a function.

Oven Control, Clock and Timer

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RangesXL44 Self-Cleaning Gas Help US Help YOU… If YOU Need ServiceWhen You Get Your Range Important Safety InstructionsSurface Cooking Save These Instructions Clean only parts listed in this Use and Care GuideFeatures and appearance vary Features of Your RangeSee Oven Light On/Off Switch Automatic Oven LightClock and Timer Oven on Light Clean Light Surface Cooking Do not use a wok on a support ring. Placing Top-of-Range CookwareCook Time ON/OFF. Press this for Timed Baking operations Features of Your Oven ControlOven CONTROL, Clock and Timer Using Your Oven Automatic Oven Shut Off Oven ShelvesShelf Positions Type of Food Shelf Position How to Set Your Range for BakingBaking Cookies Pan PlacementPreheating Baking GuidesDon’t Peek PiesCakes Baking PansTimed Baking How to Time BakeHow to Set Immediate Start and Automatic Stop Quick Reminder How to Set Delay Start and Automatic StopQuestions and Answers Can I use the minute timer during oven cooking?To Adjust the Thermostat Adjust the Oven ThermostatUse of Aluminum Foil RoastingDual Shelf Cooking Frozen Roasts Why is my roast crumbling when I try to carve it?Roasting Guide Should I salt the meat before broiling? Why are my meats not turning out as brown as they should?Broiling Oven door must be closed during broilingBroiling Broiling GuideDo not rub or clean the door gasket Operating the SELF-CLEANING OvenBefore a Clean Cycle Clean cycle time is normally 4 hours How to Set the Oven for CleaningTo Stop a Clean Cycle After a Clean CycleWhy do I have ash left in my oven after cleaning? How to Set Delay Start of Cleaning on some modelsCan I clean the woven gasket around the oven door? Should there be any odor during the cleaning?Standard Twin Burners on some models Care and CleaningFor proper ignition Sealed Burner Assemblies on some modelsOven Bottom Burner GratesCooktop Surface Outside of the door Lift-Off Oven DoorBroiler Pan and Grid Inside of the doorRemovable Storage Drawer on some models Oven Light Replacement on some modelsControl Panel and Knobs To raise the cooktop Oven Air VentsRemovable Kick Panel on some models Never block the vents air openings of the rangeFor Your Safety Installation InstructionsImportant Safety Instructions General Provide Adequate GAS Supply Rigid Pipe Hookup for Models Equipped with Sealed Burners IMPORTANT-Please read carefully Electrical RequirementsExtension Cord Cautions Electric Disconnect Yellow flames Electric Ignition ModelsTo remove the oven bottom Leveling the Range ⁄ 8 ″ Page Page Problem Possible Cause QUESTIONS? Before YOU Call for SERVICE…Before You Call for Service Food does not We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warranty Service Telephone Numbers
Top Page Image Contents