GE JBP46, JBP47, JBP45 owner manual How to Delay the Start of Cleaning, After a Clean Cycle

How to Delay the Start of Cleaning

Safety Information

	OVEN ON		OFF	PREHEATED
	BROIL			WM
				200
LATCH	AUTO			250
	SELF
DOOR
	CLEAN			300
	550			350
		500	450	400

START

TIME

ON/OFF

(on some models)

1 Latch the door.

2 Turn the Oven Temperature knob to

AUTO SELF CLEAN.

3 Press the START TIME ON/OFF pad.

4 Press the HOUR and MIN. pads to set the time cleaning will start.

When the LATCH DOOR light flashes, slide the latch handle to the left as far as it will go and turn the Oven Temperature knob to OFF.

Operating Instructions Installation Instructions

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

■You cannot set the oven for cooking until the oven is cool enough for the door to be unlatched.

■While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the COOK TIME ON/OFF pad.

■If the shelves become hard to slide, wipe the shelf supports with cooking oil.

Troubleshooting Tips Customer Service

21