GE JBP46, JBP47, JBP45 Oven Heating Elements, Oven Shelves, Oven Light Replacement on some models

Page 24
Oven Heating Elements

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Care and cleaning of the range.

Oven Heating Elements

Do not clean the bake element or the broil element.

Any soil will burn off when the elements are heated.

To clean the oven floor, gently lift the bake element.

Clean with warm soapy water.

Oven Shelves

Clean the shelves with an abrasive cleanser or steel wool.

Oven Light Replacement (on some models)

CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely.

Wire Cover Holder

To remove the cover:

 

1

Hold a hand under the cover so it doesn’t fall when

 

released. With fingers of the same hand, firmly push

 

 

back the wire cover holder. Lift off the cover.

 

 

Do not remove any screws to remove the cover.

 

2 bulb.Replace bulb with a 40-watt household appliance

 

To replace the cover:

 

1

Place it into groove of the light receptacle. Pull wire

 

forward to the center of the cover until it snaps into

 

 

place.

 

2

Connect electrical power to the range.

24

Image 24
Contents GE Appliances GE Answer CenterOwner’s Manual JBP19 JBP21 JBP24 JBP25 JBP26 JBP30 JBP45 JBP46 JBP47Staple sales slip or cancelled check here Congratulations You Are Now Part of the GE FamilyWrite the model and serial numbers here # # GE & You A Service Partnership Troubleshooting TipsIf You Need Service Safety InformationIMPORTANT SAFETY NOTICE IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USINGor using a ventilation fan or hood WARNING ANTI-TIP DEVICESAFETY PRECAUTIONS Safety Information OperatingSafety Information WHEN COOKING PORK… Instructions Troubleshooting Tips Customer ServiceOVEN SELF-CLEANING OVEN Safety Information Operating SURFACE COOKING UNITSCustomer Service Troubleshooting Tips We want you to remain a happy and healthy part of our GE familyREMEMBER… SAVE THESE INSTRUCTIONSUsing the surface units SafetyInstallation Instructions How to SetUsing the oven controls TIMER ON/OFFAUTOMATIC OVEN Light START TIME ON/OFFOven Control Settings OVEN ON LightPREHEATED Light Oven Temperature KnobUsing the oven Safety InformationD C B A Operating InstructionsSafety Information Operating Instructions Installation Instructions Preheating and Pan PlacementHow to Set the Oven for Broiling Aluminum FoilBroiling guide ShelfFirst Side FoodUsing the clock and timer To Set the TimerTo Reset the Timer To Cancel the TimerUsing the timed baking and roasting features Automatic StopHow to Set a Delay Start and Automatic Stop Make sure the oven clock shows the correct time of dayFor Models with Only an Oven Temperature Knob For Models with Pads and an Oven Temperature KnobAdjust the oven thermostat-Do it yourself Troubleshooting Tips Customer ServiceUsing the self-cleaning oven Before a Clean CycleCustomer Service Troubleshooting How to Set the Oven for CleaningHow to Delay the Start of Cleaning After a Clean CycleTroubleshooting Tips Customer Service Operating Instructions Installation InstructionsCare and cleaning of the range or any reason, be sure the anti-tip device istipping of the range and cause injury Control Panel and KnobsLift-Off Oven Door To clean the inside of the doorTo clean the outside of the door Do not lift the door by the handleOven Light Replacement on some models Oven Heating ElementsOven Shelves Do not clean the bake element or the broil elementHow to Remove the Storage Drawer or Kick Panel to Clean Under the RangeBroiler Pan & Grid To remove the storage drawerOperating Instructions Safety Information Customer Service Troubleshooting Tips Installation InstructionsPorcelain Enamel Cooktop Lift-Up Cooktop on some modelsSurface Units Drip Pansflat on the drip pan when you plug it back in Do not clean the surface units in a dishwasherInstallation of the range Installation Instructions for future useBEFORE BEGINNING INSTALLATION Before You Begin1 Prepare the Opening install in either rear cornerNot less than the width 30 ″Flooring Under the Range 2 Prepare for Electrical ConnectionWhen moving the range on this type of flooring, it should be installed on a 1/4″ thick sheet of plywood or similar material as follows 3 Power Cord Strain Relief Installation 4 3-Wire Power Cord Installation Connector block Neutral terminal Ground strap Power cordDo NOT remove ground strap connection 5 4-Wire Power Cord Installation BeforeAfter 6 3-Wire Conduit Installation NOTE ALUMINUM WIRINGa Do not connect aluminum wire to the connector block 7 4-Wire Conduit Installation 8 Anti-Tip Bracket Installation 9 Leveling the Range10 Final Check Before you call for service… Troubleshooting TipsProblem See the Using theCustomer Service Troubleshooting Tips Installation Instructions Operating InstructionsSee the Adjust the oven See the Broiling guideSee the Using the clock and timer sectionBefore you call for service… right as far as it will go. Turn Customer Service Troubleshooting Tips Installation Instructions Operating InstructionsGE Electric Range Warranty What Is Not CoveredSafety Information Operating Instructions We Will Replace, At No Charge To YouService Telephone Numbers In-Home Repair Service 800-GE-CARESTDD 800-TDD-GEAC Special Needs Service