GE PB750 owner manual Safety Instructions

Page 5

ge.com

RADIANT SURFACE UNITS

Safety Instructions

■Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls have been turned off.

■Keep an eye on foods being fried at high or medium high heat settings.

■Foods for frying should be as dry as possible. Frost on frozen foods or moisture on fresh foods can cause hot fat to bubble up and over the sides of the pan.

■Use little fat for effective shallow or deep fat frying. Filling the pan too full of fat can cause spillovers when food is added.

■If a combination of oils or fats will be

used in frying, stir together before heating, or as fats melt slowly.

■Always heat fat slowly, and watch as it heats.

■Use a deep fat thermometer whenever possible to prevent overheating fat beyond the smoking point.

■Avoid scratching the glass cooktop.

The cooktop can be scratched with items such as sharp instruments, rings or other jewelry, and rivets on clothing.

■Do not operate the radiant surface units if the glass is broken. Spillovers or cleaning solution may penetrate a broken cooktop and create a risk of electrical shock. Contact a qualified technician immediately should your glass cooktop become broken.

■Never use the glass cooktop surface as a cutting board.

■Do not place or store items that can melt or catch fire on the glass cooktop, even when it is not being used.

■Be careful when placing spoons or other stirring utensils on glass cooktop surface when it is in use. They may become hot and could cause burns.

■Clean the cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot surface unit, be careful to avoid steam burns. Some cleaners can produce noxious fumes if applied to a hot surface.

NOTE: We recommend that you avoid wiping any surface unit areas until they have cooled and the indicator light has gone off. Sugar spills are the exception to this. Please see the Cleaning the glass cooktop section.

■When the cooktop is cool, use only CERAMA BRYTE® Ceramic Cooktop Cleaner and the CERAMA BRYTE® Cleaning Pad to clean the cooktop.

■To avoid possible damage to the cooking surface, do not apply cleaning cream to the glass surface when it is hot.

■After cleaning, use a dry cloth or paper towel to remove all cleaning cream residue.

■Read and follow all instructions and warnings on the cleaning cream labels.

■Large scratches or impacts to glass doors or cooktops can lead to broken or shattered glass.

■Do not leave any items on the cooktop. The hot air from the vent may ignite flammable items and will increase pressure in closed containers, which may cause them to burst.

■Do not leave plastic items on the cooktop—they may melt if left too close to the vent.

■Do not lift the cooktop. Lifting the cooktop can lead to damage and improper operation of the range.

Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Write the model and serial numbers here Model # Serial # 49-80538-1 08-08 JRANTI-TIP Device Ge.com Safety PrecautionsCare and Cleaning Operating Instructions Safety InstructionsSafety Instructions Tips Care OvenWarming Drawer on some models Instructions Using the surface unitsInstructions Safety Instructions Care SafetyCleaning Troubleshooting Tips Consumer Support About the radiant surface units… Selecting types of cookware Using the self-cleaning oven section Using the oven controlsTips Care and Cleaning Consumer Support Using the ovenCleaning How to Set the Upper Oven for Broiling Consumer Support Troubleshooting Tips Care and CleaningBroiling Guide HI BroilTo Set the Kitchen Timer Using the clock and kitchen timerTo Reset the Kitchen Timer To Cancel the Kitchen TimerSafety Instructions Using the timed baking and roasting featuresCleaning Operating Instructions Consumer Support Troubleshooting TipsFahrenheit or Celsius Temperature Selection Special features of your oven controlHour Shutdown Tones at the End of a Timed CycleYour control is set to use a 12-hour clock Hour, 24-Hour or Clock BlackoutCleaning Troubleshooting Tips Using the Sabbath featureHow to Set Sabbath Feature for Regular Baking/Roasting How to Exit the Sabbath FeatureType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfTo Adjust the Thermostat To Use the Warming Drawer Using the warming drawer on some modelsWhen Using the Warming Drawer Temperature Selection Chart Operating Instructions SafetyTo Crisp Stale Items To Warm Serving Bowls and PlatesHow to Set the Oven for Cleaning Using the self-cleaning ovenBefore a Clean Cycle How to Delay the Start of Cleaning After a Clean CycleHow to Remove Protective Shipping Film and Packaging Tape Care and cleaning of the rangeOperating Instructions Control Knobs Oven VentLift-Off Oven Door Painted SurfacesControl Panel Oven Light Replacement Troubleshooting Tips Consumer SupportOven Racks Oven Heating ElementsRemovable Warming Drawer Pan on some models Instructions SafetyStorage Drawer Removal on some models To remove the drawerCare Cleaning the glass cooktopCleaning Glass surface-potential for permanent damage Cleaning OperatingProblem Possible Causes What To Do Before you call for service…See the Using the clock and timer section Clock and timerOven temperature Do not workDuring a clean cycle See the Using the self-cleaning oven sectionClean cycle Oven not clean after Clean cyclePower outage See the Special features of your oven control sectionDisplay goes blank Display flashesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Care and Cleaning Looking For Something More? AccessoriesTips Consumer Support GE Electric Range WarrantyGE Will Provide What GE Will Not CoverParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

PB750 specifications

The GE PB750 is a notable addition to the field of power generation, specifically designed for high-efficiency and reliability in the gas turbine market. This model represents a significant advancement in gas turbine technology, providing operators and utilities with an effective solution for meeting growing energy demands while minimizing environmental impact.

At the heart of the GE PB750 is its advanced aerodynamics and materials technology, which contribute to its superior performance. The turbine features a robust design that allows for increased efficiency and flexibility, making it capable of operating in various conditions. The incorporation of advanced cooling techniques ensures that the turbine can maintain optimal performance even at high temperatures, which is essential for meeting peak demand periods in electricity generation.

One of the standout features of the PB750 is its combined cycle capability, which maximizes the energy extracted from the fuel. This technology enables the turbine to use both gas and steam cycles, leading to a significant reduction in carbon emissions compared to traditional single-cycle plants. Furthermore, the GE PB750 is equipped with advanced emissions control systems, which help to further reduce NOx and CO2 emissions, making it compliant with stringent environmental regulations.

The control system of the GE PB750 is designed with digital technology that enhances operational efficiency. Advanced analytics and monitoring capabilities provide real-time insights into performance, allowing operators to make informed decisions. This digital integration also facilitates predictive maintenance, reducing downtime and ensuring the turbine operates at peak performance.

The PB750’s modular design provides greater flexibility in installation and maintenance, making it an attractive option for utility operators. The ability to perform maintenance and upgrades while the unit is operating contributes to overall efficiency and reduces outages.

In summary, the GE PB750 gas turbine exemplifies cutting-edge technology in the power generation sector. Its high efficiency, reduced emissions, and advanced digital controls make it a suitable choice for meeting the energy demands of the future while ensuring compliance with environmental standards. As the world shifts towards cleaner energy solutions, the PB750 stands out as a reliable and innovative option for power generation.
Top Page Image Contents