GE JSP57 Control signals after, Or start time, Display goes blank, Display flashes, Unable to get

Page 39

www.GEAppliances.com

Problem		Possible Causes	What To Do

Control signals after		You forgot to enter a	• Touch the BAKE pad and desired temperature or
entering cooking time		bake temperature or	the SELF CLEAN LO/STD pad and desired clean time.
or start time		cleaning time.

Display goes blank		A fuse in your home may be	• Replace the fuse or reset the circuit breaker.
		blown or the circuit
		breaker tripped.

		The clock is in the	• See the Special features of your oven control section.
		black-out mode.

Display flashes		Power failure.	• Reset the clock.

Unable to get the		Oven control pads were	• The BROIL HI/LO and BAKE pads must be touched at
display to show “SF”		not touched properly.	the same time and held for 3 seconds.

“Probe” appears in		This is reminding you to	• Enter a probe temperature.
the display		enter a probe temperature
(on some models)		after plugging in the probe.

Power outage,		Power outage or surge.	• Reset the clock. If the oven was in use, you must reset
clock flashes			it by touching the CLEAR/OFF pad, setting the clock
			and resetting any cooking function.

Steam from the vent		When using the convection	• This is normal.
		feature, it is normal to see
		steam coming out of the oven
		vent. As the number of racks
		or amount of food being
		cooked increases, the amount
		of visible steam will increase.

“Burning” or “oily”		This is normal in a new oven	• To speed the process, set a self-clean cycle for a
odor emitting from		and will disappear in time.	minimum of 3 hours. See the Using the self-cleaning
the vent			oven section.

Strong odor		An odor from the insulation	• This is temporary.
		around the inside of the oven
		is normal for the first few times
		the oven is used.

Fan noise		A cooling fan or a convection	• This is normal. The cooling fan will turn off and on
		fan (depending on the	to cool internal parts. It may run after the oven is
		function you are using) may	turned OFF. The convection fan will cycle on and off.
		automatically turn on and off.	until the function is over or the door is opened.

39

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Image 39

Contents Write the model and serial numbers here Model # Serial #All ranges can tip and injury could result Consumer SupportSupport Safety InstructionsRadiant Surface Units Operating Instructions Care and Cleaning Troubleshooting TipsUsing the Bridge Surface Unit Using the surface unitsHow to Set Using the Warming Zone on some modelsDual Surface Unit Control Knob Instructions Care and CleaningSafety Instructions Operating Temperature LimiterSelecting types of cookware Observe the Following Points in Canning Using a pressure canner,Using the self-cleaning oven section Using the oven controlsProgrammed functions must be reset Has been a power outageUsing the oven SafetyTroubleshooting Tips HI Broil How to Set the Oven for BroilingBroiling Guide If your range is connected toUsing the clock, timer and control lockout CleaningOperating Instructions Care Using the timed baking and roasting features Safety InstructionsSupport Troubleshooting Tips Care Using the probe. on some models Troubleshooting Tips Consumer SupportCare and Cleaning Tips Care Using the convection ovenCleaning Operating Consumer Support TroubleshootingConvection Roast Care and CleaningTroubleshooting Tips Consumer Support How to Set the Oven for Convection Baking or RoastingTips Care and Cleaning Operating Instructions Using the timed features for convection cookingOror Convection Roasting Guide Cleaning Operating Instructions SafetyTo Crisp Stale Items Using the proofing and warming featuresHow to Set the Oven For Proofing on some models How to Set the Oven For Warming on some modelsType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions To Adjust the ThermostatInstructions Operating Instructions Care Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning After a Clean CycleHour Shutdown Special features of your oven controlSafety Instructions Fahrenheit or Celsius Temperature SelectionCare Consumer Support Troubleshooting TipsOperating Instructions Safety Tone VolumeTouch the Convection Bake or Convection baking temperaturesConverted temperature of 325F To deactivate the featureHow to Set for Regular Baking/Roasting Using the Sabbath FeatureTroubleshooting Tips Care and Cleaning How to Exit the Sabbath FeatureOven Vent Care and cleaning of the rangeHow to Remove Packaging Tape Control KnobsLift-Off Oven Door Operating Instructions SafetyTroubleshooting Tips Care and Cleaning Cleaning the Oven DoorOven Racks and Convection Roasting Rack Instructions CareInstructions Operating Removable Oven FloorInstructions Safety Cleaning OperatingCare Stainless Steel Surfaces on some models Painted SurfacesDo not use a steel wool pad it will scratch the surface Cleaning Operating Instructions Cleaning the glass cooktopTo Order Parts Metal Marks and ScratchesInstructions Operating Instructions Damage from Sugary Spills and Melted PlasticProblem Possible Causes What To Do Before You Call For Service…Food does not Oven temperatureFood does not bake Or roast properlyDuring a clean cycle Clock and timer doSee the Using the clock and timer section See the Using the self-cleaning oven sectionOr start time Control signals afterSee the Special features of your oven control section Power outageConsumer Support Troubleshooting Tips Care and Cleaning We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Electric Range WarrantyGE Will Provide What GE Will Not CoverReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website