GE JGB902 Using the clock and timer, Installation Instructions, Consumer Service

Page 15

Using the clock and timer.

www.GEAppliances.com

Not all features are on all models.

Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self- cleaning cycle.

Touch the CLOCK pad.

Touch the number pads.

Touch the number pads the same way you read them. For example, to set 12:34, touch the number pads 1, 2, 3 and 4 in that order.

If number pads are not touched within one minute after you touch the CLOCK pad, the display reverts to the original setting. If this happens, touch the CLOCK pad and reenter the time of day.

Touch the START pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

Instructions Operating Instructions

The timer is a minute timer only.

The CLEAR/OFF pad does not affect the timer.

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the KITCHEN TIMER ON/OFF pad.

Touch the number pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes. For example, to enter 90 minutes as 1 hour 30 minutes, touch 1, 3 and 0 in that order.

If you make a mistake, press the KITCHEN TIMER ON/OFF pad and begin again.

Touch the START pad. After pressing the START pad, SET disappears; this tells you the time is counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the KITCHEN TIMER ON/OFF pad is touched.

The 6 second tone can be canceled by following the steps in the Special features of your oven control section under Tones at the End of

a Timed Cycle.

Installation Instructions

To Reset the Timer

If the display is still showing the time remaining, you may change it by touching the KITCHEN TIMER ON/OFF pad, then touch the number pads until the time you want appears in the display.

If the remaining time is not in the display (clock, delay start or cooking time are in the display), recall the remaining time by touching the KITCHEN TIMER ON/OFF pad and then touching the number pads to enter the new time you want.

Troubleshooting Tips

To Cancel the Timer

Touch the KITCHEN TIMER ON/OFF pad twice.

Power Outage

If a flashing time is in the display, you have

To reset the clock, touch the CLOCK pad.

experienced a power failure. Reset the clock.

Enter the correct time of day by touching

 

the appropriate number pads. Touch the

 

START pad.

 

15

Consumer Service

Image 15
Contents Write the model and serial numbers here Model # Serial # Installation InstructionsAll ranges can tip and injury could result Consumer Support TroubleshootingSafety Instructions Operating Instructions Important Safety NoticeInstructions Surface Burners Instructions Operating Instructions Safety Consumer Support Troubleshooting Tips InstallationSupport Troubleshooting Tips ConsumerConsumer Using the gas surface burnersTroubleshooting Tips Installation InstructionsSafety Installation Instructions Troubleshooting TipsConsumer Support Oven Control, Clock and Timer Features on some models Using the oven controlsOven Light Pad on some models Troubleshooting Tips Consumer SupportConsumer Support Using the ovenInstallation Instructions Operating Troubleshooting TipsOven Moisture How to Set the Oven for Baking or RoastingPreheating and Pan Placement Aluminum FoilHI Broil How to Set the Oven for BroilingBroiling Guide Broiling GuideUsing the clock and timer Installation InstructionsConsumer Service How to Set a Delayed Start and Automatic Stop Using the timed baking and roasting featuresConsumer Support Troubleshooting Tips Installation How to Set an Immediate Start and Automatic StopUsing the probe. on some models How to Set the Oven For Cooking When Using the ProbeInstallation Instructions Using the convection oven. on some models Installation Instructions Operating Instructions SafetyConsumer Support Troubleshooting Tips Troubleshooting Tips Consumer Support How to Set the Oven for Convection Baking or RoastingMulti-Shelf Baking Touch the Convection Roast pad Operating Instructions SafetyMeats Convection Roasting GuideInstallation Instructions Operating Instructions Using the timed convection baking features. on some modelsSafety Instructions Consumer Support Troubleshooting TipsHour Shut-Off Special features of your oven controlSafety Instructions Fahrenheit or Celsius Temperature SelectionCooking function is finished Control Lockout on some modelsCook and Hold Hour, 24-Hour or Clock BlackoutSafety Instructions Using the Sabbath FeatureInstructions Troubleshooting Tips Consumer Support How to Set for Regular Baking/RoastingHow to Exit the Sabbath Feature Type of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfSafety Instructions To Adjust the ThermostatTo Use the Warming Drawer Using the electric warming drawer. on some modelsWhen Using the Warming Drawer Warming drawer cannot be used during a self-clean cycleTo Crisp Stale Items Instructions Troubleshooting Tips Consumer SupportInstructions Operating Instructions Installation Temperature Selection ChartHow to Set the Oven for Cleaning Using the self-cleaning ovenConsumer Support Troubleshooting Tips Installation Before a Clean CycleHow to Delay the Start of Cleaning After a Clean CycleSealed Burner Assemblies Care and cleaning of the rangeBurner Caps and Heads Tips Consumer SupportCooktop Surface Consumer Support TroubleshootingCleaning Burner GratesBroiler Pan and Grid Troubleshooting TipsLift-Off Oven Door Oven BottomRemovable Drawer To remove the drawerTo replace the drawer Upper Control Panel Safety Instructions OperatingUnlock the touch pads after cleaning Oven Air VentsDo not remove any screws to remove the cover Oven Light ReplacementOven Shelves To removeFor Your Safety Tools YOU will NeedMaterials YOU MAY Need Electrical Connections in this section Installation InstructionsMinimum Wall on Either side Dimensions and ClearancesLocation ANTI-TIP DeviceConnect the Range to GAS Provide Adequate GAS SupplyGAS Pipe and Electrical Outlet Locations Rigid Pipe Hookup Options Flexible Connector HookupElectrical Requirements Electrical ConnectionsCheck Ignition of Surface Burners Seal the OpeningsCheck Ignition of Oven Burner To remove the oven bottom Leveling the RangeWhen ALL Hookups are Completed Installing the ANTI-TIP DeviceProblem Possible Causes What To Do Before you call for service…Entering cooking time Control signals afterOven temperature Clock and timerIs on when you want See the Using the self-cleaning oven sectionAfter a clean cycle Oven not clean after a Clean cycleUnable to get Power outageDisplay goes blank Display flashesLooking For Something More? AccessoriesWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Operating Instructions Installation Instructions Troubleshooting Tips Consumer SupportWhat GE Will Not Cover Instructions Safety InstructionsOperating GE Will ReplaceWhat Camco Will Not Cover Safety Instructions OperatingInstructions Installation Instructions Camco Will ReplaceConsumer Support GE Appliances Website Schedule Service