GE JGB902 installation instructions Operating Instructions Safety, Touch the Convection Roast pad

Page 20

Instructions

Using the convection oven. (on some models)

How to Set the Oven for Convection Roasting when Using the Probe (on some models)

Operating Instructions Safety

For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven.

The display will flash PROBE and the oven control will signal if the probe is inserted into the outlet, and you have not set

a probe temperature and touched the START pad.

Place the shelf in the shelf position

(A). Insert the probe completely into the food.

Plug the probe into the outlet in the oven. Make sure it is pushed all the way in. Close the oven door.

Touch the CONVECTION ROAST pad.

Touch the number pads to set the desired oven temperature.

Touch the PROBE pad.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the oven.

NOTE:

■If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

■You will hear a fan while cooking with this feature. The fan will stop when the door is opened but the heat will not turn off.

■You can use the timer even though you cannot use timed oven operations while using the probe.

Consumer Support Troubleshooting Tips Installation Instructions

Touch the number pads to set the desired internal food temperature.

To change the oven temperature during the Convection Roast cycle, touch the CONVECTION ROAST pad and then touch the number pads to set the new desired temperature.

Touch the START pad.

When the oven starts to heat, the word

LO will be in the display.

After the internal temperature of the food reaches 100°F, the changing internal temperature will be shown in the display.

When the internal temperature of the food reaches the number you have set, the probe and the oven turn off and the oven control signals. To stop the signal, touch the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

20

Image 20

Contents Installation Instructions Write the model and serial numbers here Model # Serial #Consumer Support Troubleshooting All ranges can tip and injury could resultImportant Safety Notice Safety Instructions Operating InstructionsInstructions Surface Burners Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions SafetyTroubleshooting Tips Consumer SupportUsing the gas surface burners Troubleshooting Tips InstallationInstructions ConsumerConsumer Support SafetyInstallation Instructions Troubleshooting Tips Using the oven controls Oven Control, Clock and Timer Features on some modelsTroubleshooting Tips Consumer Support Oven Light Pad on some modelsUsing the oven Installation Instructions OperatingTroubleshooting Tips Consumer SupportHow to Set the Oven for Baking or Roasting Preheating and Pan PlacementAluminum Foil Oven MoistureHow to Set the Oven for Broiling Broiling GuideBroiling Guide HI BroilConsumer Service Using the clock and timerInstallation Instructions Using the timed baking and roasting features Consumer Support Troubleshooting Tips InstallationHow to Set an Immediate Start and Automatic Stop How to Set a Delayed Start and Automatic StopInstallation Instructions Using the probe. on some modelsHow to Set the Oven For Cooking When Using the Probe Consumer Support Troubleshooting Tips Using the convection oven. on some modelsInstallation Instructions Operating Instructions Safety Multi-Shelf Baking Troubleshooting Tips Consumer SupportHow to Set the Oven for Convection Baking or Roasting Operating Instructions Safety Touch the Convection Roast padConvection Roasting Guide MeatsUsing the timed convection baking features. on some models Safety InstructionsConsumer Support Troubleshooting Tips Installation Instructions Operating InstructionsSpecial features of your oven control Safety InstructionsFahrenheit or Celsius Temperature Selection Hour Shut-OffControl Lockout on some models Cook and HoldHour, 24-Hour or Clock Blackout Cooking function is finishedUsing the Sabbath Feature Instructions Troubleshooting Tips Consumer SupportHow to Set for Regular Baking/Roasting Safety InstructionsHow to Exit the Sabbath Feature Adjust the oven thermostat-Do it yourself Safety InstructionsTo Adjust the Thermostat Type of margarine will affect baking performanceUsing the electric warming drawer. on some models When Using the Warming DrawerWarming drawer cannot be used during a self-clean cycle To Use the Warming DrawerInstructions Troubleshooting Tips Consumer Support Instructions Operating Instructions InstallationTemperature Selection Chart To Crisp Stale ItemsUsing the self-cleaning oven Consumer Support Troubleshooting Tips InstallationBefore a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle How to Delay the Start of CleaningCare and cleaning of the range Sealed Burner AssembliesTips Consumer Support Burner Caps and HeadsConsumer Support Troubleshooting CleaningBurner Grates Cooktop SurfaceTroubleshooting Tips Lift-Off Oven DoorOven Bottom Broiler Pan and GridTo replace the drawer Removable DrawerTo remove the drawer Safety Instructions Operating Unlock the touch pads after cleaningOven Air Vents Upper Control PanelOven Light Replacement Oven ShelvesTo remove Do not remove any screws to remove the coverMaterials YOU MAY Need For Your SafetyTools YOU will Need Installation Instructions Electrical Connections in this sectionDimensions and Clearances Minimum Wall on Either sideANTI-TIP Device LocationProvide Adequate GAS Supply Connect the Range to GASGAS Pipe and Electrical Outlet Locations Flexible Connector Hookup Rigid Pipe Hookup OptionsElectrical Connections Electrical RequirementsCheck Ignition of Oven Burner Check Ignition of Surface BurnersSeal the Openings Leveling the Range To remove the oven bottomInstalling the ANTI-TIP Device When ALL Hookups are CompletedBefore you call for service… Problem Possible Causes What To DoControl signals after Oven temperatureClock and timer Entering cooking timeSee the Using the self-cleaning oven section After a clean cycle Oven not clean after aClean cycle Is on when you wantPower outage Display goes blankDisplay flashes Unable to getAccessories Looking For Something More?We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Troubleshooting Tips Consumer Support Operating Instructions Installation InstructionsInstructions Safety Instructions OperatingGE Will Replace What GE Will Not CoverSafety Instructions Operating Instructions Installation InstructionsCamco Will Replace What Camco Will Not CoverGE Appliances Website Schedule Service Consumer Support