GE 31-10463, 229C4053P447-3 1 installation instructions Final Check List, Operation Check List

Page 11

Installation Instructions

E

Final Check List

Check to make sure the circuit breaker is closed (Reset) or the circuit fuses are replaced. Be sure power is in service to the building.

Check to be sure that all packing materials and tape on metal panel (if applicable) under control knobs have been removed.

F

Operation Check List

Check to make sure the Clock display is energized. If a series of horizontal red lines appear in the display, disconnect power immediately. Recheck the range wiring connections. If change is made to connections, retest again. If no change is required, have building wiring checked for proper connections and voltage. It is recommended that the clock be changed if the red lines appear.

Push in and turn any one of the four surface knobs to “MED” setting to observe that the element glows within 60 seconds. Turn the knob off when glow is detected. If the glow is not detected within the time limit, recheck the range wiring connections. If change is required, retest again. If no change is required, have building wiring checked for proper connections and voltage.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Tools You Will Need Parts IncludedMaterials Needed For Your Safety Installation InstructionsDo not Lift the Door by the Handle Pre- Installation ChecklistPreparing the Range COOKTOP, WALLS, and Above Cooktop Installation Required ClearancesMinimum Dimensions Between B1 Making the Electrical Connection Electrical Connections Electrical RequirementsElectrical Connections NEW Construction and Four Wire Cord Connection KITTHREE- Wire Cord Connection KIT C1 Locating The Bracket Installing the Anti-Tip BracketINSTALLATION-WOOD Construction INSTALLATION-CONCRETE ConstructionReplacing the Oven Door Installing the RangeStorage Drawer Removal Final Check of the Anti-Tip BracketIf Drawer Wont Close Replacing the Storage DrawerD13 D14 D15 D16Operation Check List Final Check List12229C4053P447-3

31-10463, 229C4053P447-3 1 specifications

The GE 229C4053P447-3 1,31-10463 represents a significant advancement in aerospace technology, particularly in the field of gas turbine engine components. This part is integral to ensuring the reliable and efficient operation of various aircraft systems.

One of the primary features of the GE 229C4053P447-3 is its robust design, capable of withstanding extreme temperatures and pressures encountered during flight. Manufactured using advanced alloys and composite materials, this component offers excellent durability and resistance to fatigue, significantly enhancing the lifespan of the engine. Its construction reflects GE's commitment to quality and innovation in aerospace engineering.

In terms of technologies, GE 229C4053P447-3 incorporates state-of-the-art manufacturing processes, including precision machining and advanced casting techniques. These methods ensure that each component meets stringent safety and performance standards, a critical requirement in the aviation industry. The integration of cutting-edge technologies in the design and production of this part allows for better performance metrics and operational efficiency.

A standout characteristic of the GE 229C4053P447-3 is its contribution to overall engine efficiency. The component plays a vital role in optimizing fuel combustion processes, thereby reducing emissions and operating costs. This aligns with the industry's increasing focus on sustainability and environmental responsibility. The part is engineered to enhance airflow and thermodynamic efficiency within the engine, resulting in improved thrust performance.

Furthermore, the GE 229C4053P447-3 is designed with maintenance and serviceability in mind. Its modular construction allows for easier access and replacement during routine maintenance, minimizing downtime for aircraft operators. This feature is particularly valuable for maintaining high operational readiness in commercial and military aviation sectors.

In conclusion, the GE 229C4053P447-3 1,31-10463 exemplifies GE’s innovative spirit in aerospace manufacturing. With its advanced materials, cutting-edge technologies, and focus on efficiency and longevity, this component is essential for modern aircraft engines, aligning with industry demands for performance, reliability, and sustainability. As aviation technology continues to evolve, components like the GE 229C4053P447-3 will remain at the forefront of enhancing flight capabilities and operational excellence.
Top Page Image Contents