GE 31-10463 Pre- Installation Checklist, Preparing the Range, Do not Lift the Door by the Handle

Page 3

Installation Instructions

Pre- Installation Checklist

Preparing the Range

Remove packaging materials. Any packaging materials must be removed during installation. This will include adhesive tape, wire ties, cardboard and protective plastic. Failure to remove these materials could result in damage to the appliance once the appliance has been turned on and surfaces have heated.

Open oven door and remove literature pack, broiler pan and grid, and oven racks.

Close the oven door to the broil stop position.

Place hands on both sides of the door. As you close the door, lift up and away from the range.

 

Oven Racks

 

EASY

 

EASY INSTALLATIONINSTALLATION30"OF YOUR NEW

 

30" WALLWALLOVENOF

 

OVENYOUR NEW

Broiler Pan

Literature

and Grid

Pack

Remove Installation Instructions from literature pack and read it carefully before you begin. Be sure to place all literature, Use and Care, Installation Instruction, etc. in a safe place for future reference.

EASY INSTALLATION OF YOUR NEW

FREE-STANDING RANGE

Lift door up until the hinges clear the slots.

Hinge

Clears

Slot

DO NOT LIFT THE DOOR BY THE HANDLE!

Open the oven door as far as it will go.

NOTE: The oven door is very heavy. Be sure you have a firm grip before lifting the oven door off the hinges. Use caution once the door is removed. Do not lay the door on its handle. This could cause dents or scratches.

Push the hinge locks down toward the door frame, to the unlocked position. This may require a flat blade screwdriver.

Hinge

Unlocked

HingePosition

Slot

Hinge

Arm

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Parts Included Materials NeededTools You Will Need For Your Safety Installation InstructionsPre- Installation Checklist Preparing the RangeDo not Lift the Door by the Handle Installation Required Clearances Minimum Dimensions BetweenCOOKTOP, WALLS, and Above Cooktop B1 Making the Electrical Connection Electrical Connections Electrical RequirementsElectrical Connections NEW Construction and Four Wire Cord Connection KITTHREE- Wire Cord Connection KIT C1 Locating The Bracket Installing the Anti-Tip BracketINSTALLATION-WOOD Construction INSTALLATION-CONCRETE ConstructionReplacing the Oven Door Installing the RangeStorage Drawer Removal Final Check of the Anti-Tip BracketIf Drawer Wont Close Replacing the Storage DrawerD13 D14 D15 D16Operation Check List Final Check List12229C4053P447-3

31-10463, 229C4053P447-3 1 specifications

The GE 229C4053P447-3 1,31-10463 represents a significant advancement in aerospace technology, particularly in the field of gas turbine engine components. This part is integral to ensuring the reliable and efficient operation of various aircraft systems.

One of the primary features of the GE 229C4053P447-3 is its robust design, capable of withstanding extreme temperatures and pressures encountered during flight. Manufactured using advanced alloys and composite materials, this component offers excellent durability and resistance to fatigue, significantly enhancing the lifespan of the engine. Its construction reflects GE's commitment to quality and innovation in aerospace engineering.

In terms of technologies, GE 229C4053P447-3 incorporates state-of-the-art manufacturing processes, including precision machining and advanced casting techniques. These methods ensure that each component meets stringent safety and performance standards, a critical requirement in the aviation industry. The integration of cutting-edge technologies in the design and production of this part allows for better performance metrics and operational efficiency.

A standout characteristic of the GE 229C4053P447-3 is its contribution to overall engine efficiency. The component plays a vital role in optimizing fuel combustion processes, thereby reducing emissions and operating costs. This aligns with the industry's increasing focus on sustainability and environmental responsibility. The part is engineered to enhance airflow and thermodynamic efficiency within the engine, resulting in improved thrust performance.

Furthermore, the GE 229C4053P447-3 is designed with maintenance and serviceability in mind. Its modular construction allows for easier access and replacement during routine maintenance, minimizing downtime for aircraft operators. This feature is particularly valuable for maintaining high operational readiness in commercial and military aviation sectors.

In conclusion, the GE 229C4053P447-3 1,31-10463 exemplifies GE’s innovative spirit in aerospace manufacturing. With its advanced materials, cutting-edge technologies, and focus on efficiency and longevity, this component is essential for modern aircraft engines, aligning with industry demands for performance, reliability, and sustainability. As aviation technology continues to evolve, components like the GE 229C4053P447-3 will remain at the forefront of enhancing flight capabilities and operational excellence.
Top Page Image Contents