GE 229C4053P447-3 1, 31-10463 Installation Required Clearances, Minimum Dimensions Between

Page 4

Installation Instructions

A

Installation Required Clearances

See Ilustrations below for all rough-in and spacing dimensions.

The range may be placed with 0” clearance (flush) at the back wall and side walls of the cabinet.

MINIMUM DIMENSIONS BETWEEN

**15" MIN

COOKTOP, WALLS, AND ABOVE THE

COOKTOP.

**30" MIN ***6"

MIN

*Make sure the wall covering, countertop

and cabinets around the range can with-

*0"

 

 

 

 

*0"

 

 

stand the heat (up to 200°F.) generated by

 

 

 

 

 

 

the range.

 

 

 

 

 

 

 

 

 

 

 

 

**Allow 30” Minimum clearance between

surface units and bottom of unprotected wood or metal cabinet, and 15” Minimum between countertop and adjacent cabinet bottom.

***Recommended spacing to heat sensitive surfaces.

Acceptable electrical

outlet area.2 1/2" Orient the electrical receptacle so the

length is parallel to the floor.

36"

30"

25"

2 1/2"

7 1/2"

NOTE: Use a 4 foot power cord to prevent interference with the storage drawer. Power cords 4.5 or 6 foot long may have to be dressed to allow for proper drawer closing.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Materials Needed Parts IncludedTools You Will Need Installation Instructions For Your SafetyPreparing the Range Pre- Installation ChecklistDo not Lift the Door by the Handle Minimum Dimensions Between Installation Required ClearancesCOOKTOP, WALLS, and Above Cooktop Electrical Connections Electrical Requirements B1 Making the Electrical ConnectionNEW Construction and Four Wire Cord Connection KIT Electrical ConnectionsTHREE- Wire Cord Connection KIT Installing the Anti-Tip Bracket INSTALLATION-WOOD ConstructionINSTALLATION-CONCRETE Construction C1 Locating The BracketInstalling the Range Storage Drawer RemovalFinal Check of the Anti-Tip Bracket Replacing the Oven DoorReplacing the Storage Drawer D13 D14D15 D16 If Drawer Wont CloseFinal Check List Operation Check List12229C4053P447-3

31-10463, 229C4053P447-3 1 specifications

The GE 229C4053P447-3 1,31-10463 represents a significant advancement in aerospace technology, particularly in the field of gas turbine engine components. This part is integral to ensuring the reliable and efficient operation of various aircraft systems.

One of the primary features of the GE 229C4053P447-3 is its robust design, capable of withstanding extreme temperatures and pressures encountered during flight. Manufactured using advanced alloys and composite materials, this component offers excellent durability and resistance to fatigue, significantly enhancing the lifespan of the engine. Its construction reflects GE's commitment to quality and innovation in aerospace engineering.

In terms of technologies, GE 229C4053P447-3 incorporates state-of-the-art manufacturing processes, including precision machining and advanced casting techniques. These methods ensure that each component meets stringent safety and performance standards, a critical requirement in the aviation industry. The integration of cutting-edge technologies in the design and production of this part allows for better performance metrics and operational efficiency.

A standout characteristic of the GE 229C4053P447-3 is its contribution to overall engine efficiency. The component plays a vital role in optimizing fuel combustion processes, thereby reducing emissions and operating costs. This aligns with the industry's increasing focus on sustainability and environmental responsibility. The part is engineered to enhance airflow and thermodynamic efficiency within the engine, resulting in improved thrust performance.

Furthermore, the GE 229C4053P447-3 is designed with maintenance and serviceability in mind. Its modular construction allows for easier access and replacement during routine maintenance, minimizing downtime for aircraft operators. This feature is particularly valuable for maintaining high operational readiness in commercial and military aviation sectors.

In conclusion, the GE 229C4053P447-3 1,31-10463 exemplifies GE’s innovative spirit in aerospace manufacturing. With its advanced materials, cutting-edge technologies, and focus on efficiency and longevity, this component is essential for modern aircraft engines, aligning with industry demands for performance, reliability, and sustainability. As aviation technology continues to evolve, components like the GE 229C4053P447-3 will remain at the forefront of enhancing flight capabilities and operational excellence.
Top Page Image Contents