GE 229C4053P447-3 1, 31-10463 installation instructions Installation Instructions, For Your Safety

Page 2

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

For Your Safety

WARNING: For personal safety remove house fuse or open circuit breaker before beginning

installation. Failure to do so could result in serious injury or even death.

All rough-in and spacing dimensions must be met for safe use of your range. Electricity to the range can be disconnected at the outlet without moving the range if the outlet is in the preferred location (remove lower drawer).

To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing a range hood that sticks out at least 5” beyond the front of the cabinets. Cabinets installed above a cooktop must be no deeper than 13”.

Be sure your appliance is properly installed and grounded by a qualified technician.

Make sure the cabinets and wall coverings around the range can withstand the temperatures (up to 200°F.) generated by the range.

WARNING: To reduce the risk of tipping, the appliance must be

secured by properly installed anti-tip bracket packed with the appliance.

WARNING

•All ranges can tip

•Injury to persons could result

• Install anti-tip bracket packed with range

•See Installation Instructions

If you pull the range out and away from the wall for any reason, make sure the Anti-Tip bracket is engaged when the range is pushed back against the wall.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Tools You Will Need Parts IncludedMaterials Needed Installation Instructions For Your SafetyDo not Lift the Door by the Handle Pre- Installation ChecklistPreparing the Range COOKTOP, WALLS, and Above Cooktop Installation Required ClearancesMinimum Dimensions Between Electrical Connections Electrical Requirements B1 Making the Electrical ConnectionNEW Construction and Four Wire Cord Connection KIT Electrical ConnectionsTHREE- Wire Cord Connection KIT INSTALLATION-CONCRETE Construction Installing the Anti-Tip BracketINSTALLATION-WOOD Construction C1 Locating The BracketFinal Check of the Anti-Tip Bracket Installing the RangeStorage Drawer Removal Replacing the Oven DoorD15 D16 Replacing the Storage DrawerD13 D14 If Drawer Wont CloseFinal Check List Operation Check List12229C4053P447-3

31-10463, 229C4053P447-3 1 specifications

The GE 229C4053P447-3 1,31-10463 represents a significant advancement in aerospace technology, particularly in the field of gas turbine engine components. This part is integral to ensuring the reliable and efficient operation of various aircraft systems.

One of the primary features of the GE 229C4053P447-3 is its robust design, capable of withstanding extreme temperatures and pressures encountered during flight. Manufactured using advanced alloys and composite materials, this component offers excellent durability and resistance to fatigue, significantly enhancing the lifespan of the engine. Its construction reflects GE's commitment to quality and innovation in aerospace engineering.

In terms of technologies, GE 229C4053P447-3 incorporates state-of-the-art manufacturing processes, including precision machining and advanced casting techniques. These methods ensure that each component meets stringent safety and performance standards, a critical requirement in the aviation industry. The integration of cutting-edge technologies in the design and production of this part allows for better performance metrics and operational efficiency.

A standout characteristic of the GE 229C4053P447-3 is its contribution to overall engine efficiency. The component plays a vital role in optimizing fuel combustion processes, thereby reducing emissions and operating costs. This aligns with the industry's increasing focus on sustainability and environmental responsibility. The part is engineered to enhance airflow and thermodynamic efficiency within the engine, resulting in improved thrust performance.

Furthermore, the GE 229C4053P447-3 is designed with maintenance and serviceability in mind. Its modular construction allows for easier access and replacement during routine maintenance, minimizing downtime for aircraft operators. This feature is particularly valuable for maintaining high operational readiness in commercial and military aviation sectors.

In conclusion, the GE 229C4053P447-3 1,31-10463 exemplifies GE’s innovative spirit in aerospace manufacturing. With its advanced materials, cutting-edge technologies, and focus on efficiency and longevity, this component is essential for modern aircraft engines, aligning with industry demands for performance, reliability, and sustainability. As aviation technology continues to evolve, components like the GE 229C4053P447-3 will remain at the forefront of enhancing flight capabilities and operational excellence.
Top Page Image Contents