GE 31-10463 Installing the Range, Storage Drawer Removal, Final Check of the Anti-Tip Bracket

Page 9

Installation Instructions

D

Installing the Range

Storage Drawer Removal

D1

Pull the drawer

 

 

out until it stops

 

D2

Lift the front of

 

 

the drawer until

 

 

the stops clear

 

 

the guide.

 

D3

Remove the

Stop

 

drawer.

Final Check of the Anti-Tip Bracket

When installation is

D4 complete and the range is in place, inspect to be sure the rear leveling leg is fully inserted into the slot of the Anti-Tip Bracket.

CAUTION: The oven door is heavy. You may need help lifting the door high enough to slide it into the hinges slots. Do not lift the door by the handle.

Replacing the Oven Door

Pick the Oven Door up

D9 by placing both hands on each side. The door is heavy so you may need help. Do not lift the door by the handle.

D10

Place the notch of the

hinge arm into the bot- Bottom Edge Hinge Arm

 

Of Slot

 

tom edge of the hinge

 

slot.

 

Hinge Notch

Level the Range

The range must be level for proper cooking and baking.

D5 Install the oven racks.(See Owner’s Manual for instructions.)

D6

Put a spirit level or a glass SPIRIT

 

measuring cup partially

LEVEL

 

 

 

 

filled with water on one of

 

 

the oven racks.

 

 

D7

Remove the

 

 

 

storage drawer.

 

 

 

The front leveling

 

RANGE

 

 

 

LOWER

 

legs can be

LEG

 

 

accessed from the

LEVELER

 

 

 

 

 

bottom and the

RAISE

 

RANGE

rear legs from the top.

D8 Use an adjustable wrench to adjust all four leg levelers until the range is level.

D11

Open the oven door

as far as it will open.

 

Push the hinge locks

D12 up against the front frame of the oven cavity, to the locked position.

D13

Close the oven door.

 

Hinge in

Locked Position

Notch of Hinge Securely

Fitted into Bottom of Hinge Slot

9

Continued on following page

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Parts Included Materials NeededTools You Will Need For Your Safety Installation InstructionsPre- Installation Checklist Preparing the RangeDo not Lift the Door by the Handle Installation Required Clearances Minimum Dimensions BetweenCOOKTOP, WALLS, and Above Cooktop B1 Making the Electrical Connection Electrical Connections Electrical RequirementsElectrical Connections NEW Construction and Four Wire Cord Connection KITTHREE- Wire Cord Connection KIT INSTALLATION-WOOD Construction Installing the Anti-Tip BracketINSTALLATION-CONCRETE Construction C1 Locating The BracketStorage Drawer Removal Installing the RangeFinal Check of the Anti-Tip Bracket Replacing the Oven DoorD13 D14 Replacing the Storage DrawerD15 D16 If Drawer Wont CloseOperation Check List Final Check List12229C4053P447-3

31-10463, 229C4053P447-3 1 specifications

The GE 229C4053P447-3 1,31-10463 represents a significant advancement in aerospace technology, particularly in the field of gas turbine engine components. This part is integral to ensuring the reliable and efficient operation of various aircraft systems.

One of the primary features of the GE 229C4053P447-3 is its robust design, capable of withstanding extreme temperatures and pressures encountered during flight. Manufactured using advanced alloys and composite materials, this component offers excellent durability and resistance to fatigue, significantly enhancing the lifespan of the engine. Its construction reflects GE's commitment to quality and innovation in aerospace engineering.

In terms of technologies, GE 229C4053P447-3 incorporates state-of-the-art manufacturing processes, including precision machining and advanced casting techniques. These methods ensure that each component meets stringent safety and performance standards, a critical requirement in the aviation industry. The integration of cutting-edge technologies in the design and production of this part allows for better performance metrics and operational efficiency.

A standout characteristic of the GE 229C4053P447-3 is its contribution to overall engine efficiency. The component plays a vital role in optimizing fuel combustion processes, thereby reducing emissions and operating costs. This aligns with the industry's increasing focus on sustainability and environmental responsibility. The part is engineered to enhance airflow and thermodynamic efficiency within the engine, resulting in improved thrust performance.

Furthermore, the GE 229C4053P447-3 is designed with maintenance and serviceability in mind. Its modular construction allows for easier access and replacement during routine maintenance, minimizing downtime for aircraft operators. This feature is particularly valuable for maintaining high operational readiness in commercial and military aviation sectors.

In conclusion, the GE 229C4053P447-3 1,31-10463 exemplifies GE’s innovative spirit in aerospace manufacturing. With its advanced materials, cutting-edge technologies, and focus on efficiency and longevity, this component is essential for modern aircraft engines, aligning with industry demands for performance, reliability, and sustainability. As aviation technology continues to evolve, components like the GE 229C4053P447-3 will remain at the forefront of enhancing flight capabilities and operational excellence.
Top Page Image Contents