Dimplex THE ELECTRIC STOVE manual Stove Installation, Operation, Heater ON/OFF Switch

Page 6

NOTE

A 15amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips or fuse blows on a regular basis when the heater is operating. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

WARNING

Ensure the power cord is not installed so that it is pinched or against a sharp edge and ensure that the power cord is stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock or injury to persons.

Construction and electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electric shock and injury to persons.

Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.

STOVE INSTALLATION

1.Make sure the units MAIN ON/OFF switch is switched OFF (refer to operating instruction section).

2.Plug the unit into a 15Amp/120volt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1875 watts.

OPERATION

To access the controls go to the back of the Stove.

A. Three position ON/OFF switch

The switch has two ON positions marked with “-“ and “=”.

The “-“ position is for manual operation.

In this position the built-in remote control is bypassed.

The “=” position is for operating the unit with the provided remote control.

When in “=” position the unit is operated with the ON and OFF buttons of the remote control.

When the switch is in the center position the unit is off.

B. HEATER ON/OFF SWITCH

The HEATER ON/OFF SWITCH supplies power to the heater fan and the heater element.

C. HEATER THERMOSTAT CONTROL

To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the way to turn on the heater. When the room reached the desired temperature, turn the thermostat knob counter clockwise until you hear a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on. To turn the heater off, switch the HEATER ON/OFF SWITCH to the OFF position.

NOTE:- When the heater is switched ON, the heater fan will operate. The heater element may or may not be on, depending on the thermostat control setting (SEE “HEATER THERMOSTAT CONTROL”).

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Practical USER’S Guide For the Electric Stove Contents Quick Reference Guide for the Electric Stove Important Instructions Please Retain this USER’S Guide for Future ReferenceStove Carton Operation Stove InstallationHeater ON/OFF Switch Heater Thermostat ControlMaintenance Resetting the Temperature Cutoff SwitchRemote Control Battery ReplacementTool Requirements Upper Bulb ReplacementLower Bulb Replacement Helpful HintsBrass Door Cleaning Glass CleaningPlastic Door Cleaning Nickel Door CleaningONE Year Limited Warranty Products to which this limited warranty appliesDimplex How State and Provincial law apply

THE ELECTRIC STOVE specifications

Dimplex, a well-respected brand in the field of electric heating solutions, has made significant strides with its electric stove offerings. Dimplex electric stoves are designed to combine modern technology with traditional aesthetics, providing not only efficient heating but also a pleasing focal point for any room.

One of the standout features of Dimplex electric stoves is their realistic flame effect. Utilizing innovative LED technology, these units simulate the appearance of real flames, creating a cozy ambiance without the hassle associated with traditional wood or gas stoves. The vibrant flames can often be adjusted in brightness and color, allowing users to customize their experience to suit their mood or decor.

In addition to the striking visual effects, Dimplex electric stoves are equipped with advanced heating technologies. Many models utilize patented Opti-Myst technology, which creates a three-dimensional, lifelike flame and smoke effect. This technology not only enhances the visual appeal, but it also incorporates water vapor, contributing to a more authentic fireplace atmosphere.

Beyond aesthetics, Dimplex electric stoves are lauded for their efficiency and safety. These stoves use electric heating elements, which provide quick and effective warmth with minimal energy consumption. Users can often expect instant heat output, a significant advantage over traditional heating methods that require time to warm up. Dimplex also prioritizes safety, with features like thermal cut-off, which automatically shuts off the stove should it overheat, ensuring peace of mind for those with children or pets in the home.

Another significant characteristic is the range of styles available. Dimplex offers models that mimic traditional cast iron designs, while others exhibit a more contemporary flair. This variety means that there is a Dimplex electric stove to complement any interior design, whether it be classic, modern, or somewhere in between.

Installation is also straightforward, as Dimplex electric stoves do not require venting or complex installation procedures. Most models simply plug into a standard electrical outlet, making them an immediate and convenient heating solution.

In summary, Dimplex electric stoves deliver an impressive combination of aesthetic charm, advanced heating technology, and user-friendly safety features, making them a popular choice for modern households looking to add warmth and style to their living spaces. Whether you are enjoying a quiet evening at home or entertaining guests, a Dimplex electric stove can provide both comfort and an inviting atmosphere.
Top Page Image Contents