Amana W10130752B installation instructions Mobile Home Additional Installation Requirements

Page 4

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this range must conform with the current standards CAN/CSA-A240 - latest edition, or with local codes.

Mobile home installations require:

When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

Product Dimensions

Cabinet Dimensions

Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height.

If the cabinet depth is greater than 24" (61.0 cm), oven frame must extend beyond cabinet fronts by ½" (13.0 mm) minimum.

IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

B D

C

A

E

HG

A

E

B

C

D

J

I

F

K

M L

 

N

L

A. 18"

(45.7 cm) min. clearance upper side cabinet to countertop

B. 13"

(33.0 cm) max. upper cabinet depth

A. 26¼" (67.9 cm) depth with handle B. 36" (91.4 cm)

C. 42" (106.7 cm) overall height

D.29⁷⁄₈" (75.9 cm)

E.24¼" (61.6 cm)

C. 30" (76.2 cm) min. cabinet opening width

D. For minimum clearance to top of cooktop, see NOTE*.

E. 30¹⁄₈" (76.5 cm) min. opening width

F. This shaded area recommended for installation of electrical outlet. G. This shaded area recommended for installation of rigid gas pipe.

H. 2" (5.1 cm) min. countertop space to side wall or other combustible material

I. 24" (61.0 cm) J. 10" (25.4 cm) K. 8" (20.3 cm)

L. 5" (12.7 cm) M. 2" (5.1 cm) N. 3" (7.6 cm)

*NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.

4

Image 4
Contents Installation Instructions 30 76.2 CM Freestanding GAS Ranges Range Safety Your safety and the safety of others are very importantTools and Parts Installation RequirementsLocation Requirements Product Dimensions Cabinet Dimensions Mobile Home Additional Installation RequirementsMobile home installations require Electrical Requirements Gas Supply RequirementsType of Gas Natural gasGas Supply Pressure Testing Gas Supply LineGas Pressure Regulator Burner Input RequirementsInstall Anti-Tip Bracket Installation InstructionsUnpack Range Typical rigid pipe connection Make Gas ConnectionTypical flexible connection Level Range Verify Anti-Tip Bracket LocationComplete Connection Initial lighting and gas flame adjustments If the low flame needs adjustingElectronic Ignition System Check Operation of Cooktop BurnersComplete Installation If the flame needs adjustingIf you need Assistance or Service If range does not operate, check the followingLP Gas Conversion GAS ConversionsTo Convert Gas Pressure Regulator To Convert Surface Burners To Convert Oven BurnerComplete Conversion Natural Gas ConversionStd Burner W10130752B