Roland GI-20 owner manual Avis

Page 71

For EU Countries

This product complies with the requirements of European Directive 89/336/EEC.

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Canada

NOTICE

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Image 71
Contents Using the Unit Safely page 2-3 and Important Notes Main FeaturesPage For the U.K Additional Precautions Power SupplyPlacement MaintenanceContents Front Panel Rear Panel Signal Flow Guitars That Cannot Be Used with the GK-2A/GK-2B Installing the Divided Pickup on the Guitar or BassItems to Have On Hand About MidiPreparations to Make Before Performing Connection ExamplesSelecting the Guitar or Bass Playing Sounds from a Sound Module Turning On the PowerAdjusting the Input Sensitivity Turning Off the PowerSystem Parameters What is a Patch?Selecting Patches System Parameters and Patch ParametersPatch Parameters How to Switch PatchesWhen Not Switching Patches About the DisplayWhen in Poly Mode Setting the Midi ChannelSetting the Transmission Mode MONO/POLY Setting the Midi Transmit Channel Basic CHPress PATCH/VALUE to select the Basic channel number Setting the Control Channel CTL CHControl Change Press PATCH/VALUE to select the Control channel number Performing on the GuitarProgram Change Signal Paths That Can Be Selected With Connecting to a ComputerSetting the Midi Port Setting the Midi Data PathSetting the Feeling of the Performance Play Feel Calling Up the Input Sensitivity SettingsSetting the Pedal and Switch Functions Assign Pu Patch Up Functions That Can Be Selected WithController Function 31, 64-95 Midi Control Change CC#1-31, CC#64-95Od Octave Down Pd Patch DownPt Patch Up/Down Ou Octave UpB1 Pitch Bend U4 Glide Up 4/d4 Glide DownU5-u8 Glide Up 5-8/d5-d8 Glide Down V1-V4 VibratoShifting the Pitch of the Sound Transpose Setting the Range in Which Pitches Are Changed Bend RangeSetting the Bend Range Settings That Can Be Selected WithSwitching Sounds on External Devices PRG Change Press PATCH/VALUE to select the save-destination patch Storing the Settings WriteMuting Specific Strings Press WritePress PATCH/VALUE to select the copy-destination patch Confirm that the GI-20 is set to Play ModeCopying Patches Tuning Tuner Convenient Functions Featured by the GI-20Off Convenient Functions Featured by the GI-20Receiving Saved Data Using Midi Bulk Load Midi Use a USB cable to connect the computer and the GI-20 Turn the power offReceive Saved Data Through USB Bulk Load USB Bend Data Thin FunctionPress PATCH/VALUE to select 12 or Reducing the Amount of Control Change Data TransmittedLimiting the Extent of the Bend Range Bend Range MAX Receive Control Change Data Thin FunctionSelecting the Type of USB Driver Press PATCH/VALUE to select SP or GE Turn the power offAttaching the Rubber Feet Reset to Default Factory Settings Factory ResetInstalling the Rack Mount Adaptor Turn off the power to the GI-20Pitch doesn’t change smoothly TroubleshootingVolume fluctuates from one string to another Sound doesn’t vary when the settings are changedIs Midi Bend Range the same for both sending and receiving? Problems occur after switching GI-20 patchesPitch is wrong out of tune with the guitar/bass Action Error MessagesReason Address-mapped Data Transfer One-way Transfer ProcedureRoland Exclusive Messages Data Format for Exclusive MessagesData set 1 DT1 12H Control Change Midi ImplementationChannel Voice Messages System Exclusive MessageSystem Realtime Message Channel Mode MessageAppendices Transmit Data Decimal and Hexadecimal table Appendices Exclusive CommunicationsData Set 1 DT1 12H Midi Implementation Chart GI-20 GK-MIDI Interface SpecificationsGI-20 ComputerClick the Hardware tab, and then click Driver Signing Driver InstallationWith the GI-20 disconnected, start up Windows Open the System Properties dialog boxConnect the GI-20 to your computer Installing & Setting Up the Driver WindowsSwitch on the GI-20’s power switch Prepare the CD-ROMIf What action do you want Windows to take? is set to Block If What action do you want Windows to take? is set to WarnClick Yes Click OKIf you changed What action do you want Windows to take? Next, you need to make the driver settings. pFig.d13 Make sure that File signature verification is set to IgnoreFig.d16 If File signature verification is set to Block Click Yes Continue the installationIf File signature verification is set to Warn Click the Hardware tab, and then click Driver signature Restart WindowsIf you changed File signature verification \Win98Me\Setupinf.exe SetupInf dialog box, click OK Windows XP SettingsOpen Control Panel Set Midi output Windows 98 usersOpen the Multimedia Properties dialog box Click the Midi tabUse either OMS or FreeMIDI as the Midi driver Installing the driverClick Restart to restart your Macintosh Setting the driverInstalling & Setting Up the Driver Macintosh Verify the Install Location, and click InstallOMS Driver Search dialog box will appear. Click Search Create a New Studio setup dialog box will appear. Click OKAfter you have finished the above check, exit OMS Setup My Studio Setup Window, click the keyboard iconFig.d43 About Quick Setup dialog box will appear. Click ContinuePage Find new hardware wizard does not execute automatically Problems related to the USB driverCannot install the driver correctly GI-20 is not detected when making OMS or FreeMIDI settingsDeleting incorrect device information TroubleshootingDoes your computer meet the USB specifications? Did you make Driver Signing Options? Can’t install/delete/use the driver in Windows XP/2000Deleting the driver Windows XP/2000 usersMacintosh users Windows Me/98 usersIndex Tuner String SEL IndexAvis Information

GI-20 specifications

The Roland GI-20 is a groundbreaking MIDI guitar converter that allows electric guitarists to explore the vast world of MIDI technology. Designed to bridge the gap between traditional guitar playing and digital music production, the GI-20 transforms standard guitar signals into MIDI data, giving players access to a wide array of synthesized sounds and virtual instruments.

One of the main features of the GI-20 is its ability to track the guitar’s pitch with high accuracy. Utilizing Roland’s advanced technology, the device boasts rapid response times and minimal latency, ensuring that every note plucked or strummed is translated into MIDI in real-time. This precision is crucial for guitarists who wish to maintain their playing style while experimenting with synthesizers and sampled instruments.

In terms of connectivity, the Roland GI-20 is equipped with a 13-pin connector, allowing it to interface seamlessly with compatible Roland synths, sound modules, and other MIDI devices. Additionally, standard MIDI outputs enable connection to MIDI controllers and computers, providing an expansive toolkit for music creation.

The user interface is designed with simplicity in mind. A large LCD display allows for easy navigation of settings, while intuitive controls help players adjust parameters on the fly. Guitarists can also customize their performance by altering the sensitivity levels, enabling them to fine-tune how the device responds to their playing style.

The GI-20 offers an array of built-in sounds that mirror the capabilities of traditional synthesizers. These sounds can be layered or split into different tones based on the player’s preferences, offering a variety of sonic textures to enhance compositions. Furthermore, the ability to save and recall user settings allows for quick access to preferred configurations during live performances.

Another significant characteristic of the GI-20 is its compatibility with a wide range of guitars, including both electric and bass guitars. As long as the instrument is equipped with the appropriate pickup system, the GI-20 can effectively convert its output into MIDI signals.

In summary, the Roland GI-20 is a versatile and innovative tool for guitarists seeking to expand their creative horizons. With its accurate tracking, extensive connectivity, user-friendly interface, and a wealth of sounds, it unlocks the potential for guitarists to dive into the realms of electronic music and MIDI composition. Whether in the studio or on stage, the GI-20 opens up a world of possibilities for musicians looking to blend traditional guitar playing with modern technology.