Roland GI-20 owner manual Performing on the Guitar, Program Change

Chapter 1 Try Playing Some Sounds

Program Change

These messages switch the GI-20’s patches.

Program Changes 0–49 correspond to Patches 1–50 on the GI- 20.

* Program Changes 50–127 are disregarded.

Performing on the Guitar

When you have finished making the settings, try playing the

guitar or bass to play sounds from the MIDI sound module.

1.Turn the PARAMETER knob to “PLAY MODE.”

2.Play the guitar or bass.

MIDI

Foot Controller

	Basic
	Channel
Control	Sound
	Module
Channel
	Patch

1.Turn the PARAMETER knob to “MIDI CHANNEL.”

2.Press [SELECT] to select CONTROL CHANNEL (CTL CH).

When CONTROL CHANNEL is selected, the three indicators at the left light up.

L i t

3.Press [PATCH/VALUE] to select the Control channel number.

If you want to set the omni mode, select “oM.”

4.When you have finished making the settings, turn the PARAMETER knob to return to “PLAY MODE.”

*The Control channel is a system parameter. It is saved automatically when the PARAMETER knob is turned, even without the Write procedure being carried out, and the settings values are applied to all patches.

16