Roland GI-20 owner manual Create a New Studio setup dialog box will appear. Click OK

Installing & Setting Up the Driver (Macintosh)

4.The “Create a New Studio setup” dialog box will appear. Click [OK].

fig.d35

5.The “OMS Driver Search” dialog box will appear. Click [Search].

fig.d36

6.After the search has been completed, make sure that “Roland GI-20” is listed in

the “OMS Driver Setup” dialog box, and click [OK].

fig.d37

7.After making sure that the Roland GI-20 is listed in the “OMS MIDI Device

Setup” dialog box, click check box to check mark, and click [OK].

fig.d38

8.The “Save” dialog box will appear. Input the desired file name, and click [Save].

fig.d39

If the “Create a New Studio setup” dialog box does not appear, click [New Studio setup] in the [File] menu.

If an error dialog box is displayed during the setup, disconnect all MIDI cables connected to the GI-20, and make the OMS settings once again.

61