Projection from behind the screen
Projecting a Reversed/Inverted Image
Place a translucent screen between the projector and the audience.
Reverse the image by setting “Rear” for “PRJ Mode” in the “Options” menu.
Projection using a mirror
When using the default setting.
The image is reversed.
CONNECTIONS
Place a mirror (normal flat type) in front of the lens.
Reverse the image by setting “Rear” for “PRJ Mode” in the “Options” menu, when the mirror is placed on the side where the audience is.
Info
•When using a mirror, be sure to carefully position both the projector and the mirror so that the light does not shine into the eyes of the audience.
Ceiling-mount setup
It is recommended that you use the optional ceiling- mount bracket for this installation.
Before mounting the projector, contact your nearest Authorized Service Center or Dealer to obtain the recommended
Be sure to adjust the position of the projector to match the distance (Z) from the lens center position to the lower edge of the image, when mounting the projector on the ceiling.
Invert the image by setting “Ceiling + Front” for “PRJ Mode” in the “Options” menu.
When using the default setting.
The image is reversed.
When using the default setting.
The image is reversed.
AND SETUP
24
