CONNECTIONS AND SETUP
Using the Adjustment Feet
The height of the projector can be adjusted using the adjustment feet when the surface the projector is placed on is uneven or when the screen is slanted.
The projection of the image can be made higher by adjusting the projector when it is in a location lower than the screen.
1 | Press the foot releases and lift |
| the projector to the desired |
| angle. |
2 | Remove your hands from the foot |
| releases. Once the adjustment |
feet have locked in position, place the projector down.
• If the screen is at an angle, the adjustment feet can be used to adjust the angle of the image.
Note
• The projector is adjustable up to approximately 11 degrees from the standard position.
•When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. See page 42 for details on keystone correction.
Info
•When lowering the projector, be careful not to get your finger caught in the area between the adjustment foot and the projector.
Foot releases
Adjustment feet
19
