INTRODUCTION
12
Using the Remote Control

Available Range of the Remote Control

The remote control can be used to control the
projector within the ranges shown in the
illustration.
When using the remote control:
•Be sure not to drop it, or expose it to moisture
or high temperature.
•The remote control may malfunction under a
fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.

Inserting the Batteries

The batteries (two “AAA” size) are included in the package.
Note
•The signal from the remote control can be
reflected by the screen.
1Press down the tab on the cover
and pull the cover towards the
direction of the arrow.
2Insert the included batteries.
Insert the batteries making sure the
polarities correctly match the and
marks inside the battery compartment.
3Insert the lower tab of the cover
into the opening, and press down
the cover until it clicks in place.
45°
30°
23'(7 m)
INPUT 1
INPUT 2
INPUT 3
INPUT 4
30°
45°
23'(7 m)
30°
INPUT 1
INPUT 2
INPUT 3
INPUT 4