Sync Threshold | Knoll Systems 1080p DLP manual

Sync Threshold

This function is only available on Component input.

The projector is compatible with EDTV(480p and 576p) and HDTV(720p,1080i and 1080p) video signals. If a hardware device, such a DVD player, is not syncing properly with the projector, adjust this option to help it to sync when connected to the projector.

Select “Sync Threshold” from the “Options” menu on the menu screen.

For operating the menu screen, see page 30.

Automatic Power OFF Function

When an input signal is not detected or you don't press any input button on Keypad or remote for more than 15 minutes, the projector will automatically turn off if set to “ON”.

Auto Power OFF function will be disabled when it is set to “OFF”.

Select “Auto Power OFF” from the “Options” menu on the menu screen.

For operating the menu screen, see page 30.

Note

•When the Auto Power OFF function is set to “ON”, 5 minutes before the power turns off, the message “Power OFF in 5 min.” will appear on the screen to indicate the remaining minutes.

Easy to Use Functions

44

Image 45

Knoll Systems 1080p DLP user manual Sync Threshold, Automatic Power OFF Function

Contents

1080p DLP Front Projector English Preface Preface Product Disposal Contents Appendix Introduction Package Contents Features Components Temperature indicator Projector Rear View Using the Kensington Lock Remote Control Using the Remote Control Connections and Setup Before Setting Up Connecting the Projector to Other DevicesConnecting the Power Cord Computer using Connecting to Video Equipment Connecting to Video Equipment Connect an Hdmi to Hdmi cable Connecting to Component Video EquipmentTo the projector Connect the above cable to Connecting to a Computer Connecting the Projector to a Computer Plug and Play Function Connecting the Thumbscrew Cables Using the Adjustment Feet Using the Lens Shift Adjusting the Lens Setting up the Screen Standard Setup Front ProjectionAn Example of Standard Setup When using a wide screen When using a normal screenScreen Size and Projection Distance Short throw lens Screen Size and Projection Distance Long throw lens Ceiling-mount setup Projection using a mirrorProjection from behind the screen Projecting a Reversed/Inverted Image Basic Operation Basic Operation Image Projection Basic ProcedureOutlet Press Press on the projector to Select the Input modeAbout the Input modes Info Press Menu Selecting the On-screen Display LanguagePress Or X to select Language Language, and then press Operation Menu Bar ItemsBasic This list shows the items that can be set in the projector Menu Selections Adjustments Using the Menu Screen Adjusting Image Preferences Adjusting the Picture Sharpness Black Level Advance Component / PC only Adjusting Computer Images Easy to Use Functions Select layout Selecting the Picture Display Mode Video Computer Overscan Type Overscan Adjust Position Function Keystone Function Setting the Power Save Selecting the Economy Mode Sync Threshold Automatic Power OFF Function OSD Time Out Source Select OSD Blending Film Mode STI Blank Screen Noise Reduction Reset Setting the PRJ ModeReversing/Inverting Projected Images Status Lamp Timer Reset Input Source Factory Reset Appendix Cleaning the projector Maintenance Cleaning Ventilative Holes Cleaning the Ventilative Holes Replacing the Lamp About the Lamp Temperature LED Over Temperature Follow these instructions to replace the lamp Removing and Installing the Lamp Unit Reset the lamp timer Connect the power cordRemove the lamp unit Insert the new lamp unit Pin No. Signal Name Reference Connecting Pin Assignments Computer Computer Compatibility Chart IR Remote Key Discrete Codes Video Compatibility Chart INPUT1 Component Troubleshooting Appendix Description Product Specifications Units mm inch Short Throw Lens Dimension Unit mm inch Long Throw Lens Dimension Release Version a