Knoll Systems 1080p DLP user manual Product Disposal

PREFACE

PRODUCT DISPOSAL

This projector utilizes a tin-lead solder, P-VIP Lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations.

IMPORTANT RECYCLING INSTRUCTIONS

Hg	Lamp(s) inside this product contain mercury. This product may contain other elec-
	tronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
	accordance with local, state, or federal Laws. For more information, contact the Elec-
	tronic Industries Alliance at WWW.EIAE.ORG.
	For lamp specific disposal information check WWW.LAMPRECYCLE.ORG.

Caution regarding the exhaust of the projector.

Do not place the projector in space that is poorly ventilated or confined. Allow at leat 50 cm clearance from walls and free air flow around the projector.

Exhaust Vent

Wall

or

Block

Before using the projector, please read this operation manual carefully.

To facilitate reporting the loss or theft of your Projector, record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, be sure that you have checked the contents of the carton thoroughly against the list of “Package Contents” on page 7.

WARRANTY

Promptly register the Projector’s Warranty using the REGISTRATION CARD packed with the projector. The Warranty assures that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase.

SYMBOL EXPLANATIONS

DISPOSAL:

Do not use household or municipal waste collection services for disposal of electri- cal and electronic equipment. EU countries require the use of separate recycling collection services.

3