Connecting the Thumbscrew Cables | Knoll Systems 1080p DLP guide

Connecting the Thumbscrew Cables

Connect the thumbscrew cable making sure that it fits correctly

into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug.

Do not remove the ferrite core attached to the HD 15-pin VGA cable.

Ferrite core

“Plug and Play” Function

This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup.

Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

Note

•The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA DDC compatible computer.

CONNECTIONS AND SETUP

18

Image 19

Knoll Systems 1080p DLP user manual Connecting the Thumbscrew Cables, Plug and Play Function

Contents

1080p DLP Front Projector English Preface Preface Product Disposal Contents Appendix Introduction Package Contents Features Components Temperature indicator Projector Rear View Using the Kensington Lock Remote Control Using the Remote Control Connections and Setup Computer using Connecting the Projector to Other DevicesBefore Setting Up Connecting the Power Cord Connecting to Video Equipment Connecting to Video Equipment Connect the above cable to Connecting to Component Video EquipmentConnect an Hdmi to Hdmi cable To the projector Connecting to a Computer Connecting the Projector to a Computer Plug and Play Function Connecting the Thumbscrew Cables Using the Adjustment Feet Using the Lens Shift Adjusting the Lens Standard Setup Front Projection Setting up the ScreenAn Example of Standard Setup When using a normal screen When using a wide screenScreen Size and Projection Distance Short throw lens Screen Size and Projection Distance Long throw lens Projecting a Reversed/Inverted Image Projection using a mirrorCeiling-mount setup Projection from behind the screen Basic Operation Basic Operation Press Basic ProcedureImage Projection Outlet Info Select the Input modePress on the projector to About the Input modes Language, and then press Selecting the On-screen Display LanguagePress Menu Press Or X to select Language This list shows the items that can be set in the projector Menu Bar ItemsOperation Basic Menu Selections Adjustments Using the Menu Screen Adjusting Image Preferences Adjusting the Picture Sharpness Black Level Advance Component / PC only Adjusting Computer Images Easy to Use Functions Select layout Selecting the Picture Display Mode Video Computer Overscan Type Overscan Adjust Position Function Keystone Function Setting the Power Save Selecting the Economy Mode Sync Threshold Automatic Power OFF Function OSD Time Out Source Select OSD Blending Film Mode STI Blank Screen Noise Reduction Setting the PRJ Mode ResetReversing/Inverting Projected Images Status Lamp Timer Reset Input Source Factory Reset Appendix Cleaning the projector Maintenance Cleaning Ventilative Holes Cleaning the Ventilative Holes Replacing the Lamp About the Lamp Temperature LED Over Temperature Follow these instructions to replace the lamp Removing and Installing the Lamp Unit Insert the new lamp unit Connect the power cordReset the lamp timer Remove the lamp unit Pin No. Signal Name Reference Connecting Pin Assignments Computer Computer Compatibility Chart IR Remote Key Discrete Codes Video Compatibility Chart INPUT1 Component Troubleshooting Appendix Description Product Specifications Units mm inch Short Throw Lens Dimension Unit mm inch Long Throw Lens Dimension Release Version a