Using the Menu Screen | Knoll Systems 1080p DLP instruction

Using the Menu Screen

This projector has one set of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following procedure.

Menu Selections (Adjustments)

1 Press	on remote or	on
		MENU
keypad.

•The menu screen is displayed.

Note

•The “Picture” menu screen for the selected input mode is displayed.

2 Press S or T to select the menu you want to adjust.

	ENTER
	STATUS
EXIT	MENU
ECO	INPUT

MENU button

MENU

MENU button

INPUT 1

INPUT 2

INPUT 3

INPUT 4

Basic Operation

3 Press X or to reach the Sub- menu and then press S or T to select the item you want to adjust.

Note

•The selected item will be highlighted.

4 Press W or X to adjust the item selected.

•The adjustment is stored.

5 Press to return to “Main MENU”.

6 Press , the menu screen will disappear.

30

Image 31

Knoll Systems 1080p DLP user manual Using the Menu Screen, Menu Selections Adjustments

Contents

1080p DLP Front Projector English Preface Preface Product Disposal Contents Appendix Introduction Package Contents Features Components Temperature indicator Projector Rear View Using the Kensington Lock Remote Control Using the Remote Control Connections and Setup Computer using Connecting the Projector to Other DevicesBefore Setting Up Connecting the Power Cord Connecting to Video Equipment Connecting to Video Equipment Connect the above cable to Connecting to Component Video EquipmentConnect an Hdmi to Hdmi cable To the projector Connecting to a Computer Connecting the Projector to a Computer Plug and Play Function Connecting the Thumbscrew Cables Using the Adjustment Feet Using the Lens Shift Adjusting the Lens Standard Setup Front Projection Setting up the ScreenAn Example of Standard Setup When using a normal screen When using a wide screenScreen Size and Projection Distance Short throw lens Screen Size and Projection Distance Long throw lens Projecting a Reversed/Inverted Image Projection using a mirrorCeiling-mount setup Projection from behind the screen Basic Operation Basic Operation Press Basic ProcedureImage Projection Outlet Info Select the Input modePress on the projector to About the Input modes Language, and then press Selecting the On-screen Display LanguagePress Menu Press Or X to select Language This list shows the items that can be set in the projector Menu Bar ItemsOperation Basic Menu Selections Adjustments Using the Menu Screen Adjusting Image Preferences Adjusting the Picture Sharpness Black Level Advance Component / PC only Adjusting Computer Images Easy to Use Functions Select layout Selecting the Picture Display Mode Video Computer Overscan Type Overscan Adjust Position Function Keystone Function Setting the Power Save Selecting the Economy Mode Sync Threshold Automatic Power OFF Function OSD Time Out Source Select OSD Blending Film Mode STI Blank Screen Noise Reduction Setting the PRJ Mode ResetReversing/Inverting Projected Images Status Lamp Timer Reset Input Source Factory Reset Appendix Cleaning the projector Maintenance Cleaning Ventilative Holes Cleaning the Ventilative Holes Replacing the Lamp About the Lamp Temperature LED Over Temperature Follow these instructions to replace the lamp Removing and Installing the Lamp Unit Insert the new lamp unit Connect the power cordReset the lamp timer Remove the lamp unit Pin No. Signal Name Reference Connecting Pin Assignments Computer Computer Compatibility Chart IR Remote Key Discrete Codes Video Compatibility Chart INPUT1 Component Troubleshooting Appendix Description Product Specifications Units mm inch Short Throw Lens Dimension Unit mm inch Long Throw Lens Dimension Release Version a