Selecting the Picture Display Mode
This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “Anamorphic”, “Standard”, “LetterBox”, or “Virtual Wide”.
Switching the Picture Display Using Different input signals
Press 
on remote or 
on keypad
MENU
and select layout.
•Each time 
is pressed, the display changes as shown on page 38 and 39.
INPUT 1
INPUT 2
INPUT 3
INPUT 4
Aspect Ratio
Easy to Use Functions
Aspect Ratio Function
The layout menu enables you to control how the projector resizes the input image.
The following options are available:
Anamorphic
•Resolution 1920x1080
•4:3 input is stretched to fit 16:9 display
•Stretches entire image.
Standard
•Resolution depends on the Input Signal
•4:3 input scaled to fit display height
•Width scaled to maintain 4:3 aspect ratio
•Black bars on left and right (taking up 25% of the whole display)
LetterBox
•Resolution 1920x1080
•4:3 input scaled to fit display width
•Height scaled to maintain 4:3 aspect ratio: 1440x1080
•25% of the entire image on the top and bottom is cropped.
Virtual Wide
•Resolution 1920x1080
•4:3 input is stretched to fit 16:9 display
•With 4:3 input, the central ratio remains true to scale, but the image is stretched to fit display width.
•16:9 input image is identical to the one displayed in Anamorphic mode.
37
