9

INTRODUCTION
Components

Projector (Front and Top View)

Temperature indicator

The projector has an over temperature warning LED on the control panel. If the projector overheats because
of a dirty filter or another problem, the LED will light up, and the projector lamp will turn off, after which a 90-
second cooling off period occurs. After restarting the projector, if the unit doesn’t operate normally, take the
projector in for servicing.
STATUS
EXIT
INPUT
MENU
ECO
ENTER
Focus
Zoom
LENS SHIFT(H)
LENS SHIFT(V)
ENTER button
For setting the selected items
or adjustments from the menu.
Zoom ring
Adjust screen display
Focus ring
Adjust focus.
Power (ON/OFF) buttons
For turning the power on or
off.
Intake vent
Adjustment foot
Remote control sensor
Exhaust vent
Adjustment buttons
(T,S,W,X)
For selecting menu items.
Temperature indicator
This indicator glows red, when
the temperature of the
projector exceeds the set
critical temperature or when
the fan functions abnormally.
MENU button
Press this button to enter
the OSD menus.
INPUT button
Press this button to select
the input source.
ECO button
For power saving/extended
lamp life.
Exit button
For exiting the OSD.
Lens shift dial
(Horizontal)
Lens shift dial
(Vertical)
Power indicator
Blue: The power is ready.
Blue blinking: The fan is
cooling.