16
CONNECTIONS AND SETUP
Connecting to Component
Video Equipment
Using a Component Cable (INPUT 1)
Use a component cable when connecting to
the INPUT 1 terminal and component video
equipment such as DVD players and DTV*
decoders.
*DTV is an umbrella term used to describe the
new digital television system in the United
States.
The component jack for a DVD and so forth may be
indicated with Y, CB or CR. Connect each jack as shown
below.
Note
• When connecting the projector to the video
equipment in this way, select “Component”
for “Input Source” in the “Main” menu.
Connecting by Using a
HDMI to HDMI Cable
Use an HDMI to HDMI cable when connecting
HDMI video equipment such as DVD players
to INPUT 2 terminal.
1Connect an HDMI to HDMI cable
to the projector.
2Connect the above cable to the
video equipment.
Note
• Select the input signal type of the video
equipment.
DVD player or
DTV* decoder
To analog component
output terminal
Component cable
(commercially available)
Projector Y
Y
PB
CB
PR
CR
DVD player or
DTV decoder
Supplied
accessory
HDMI to HDMI
cable
DVD player or
DTV* decoder
HDMI to HDMI cable
To HDMI output terminal