Troubleshooting
| Problem | Check |
|
|
|
|
| Projector power cord is not plugged into the wall outlet. |
|
|
Remote control batteries have run out.
Projector does not start
The selected input mode is wrong.
Cables may be incorrectly connected to the rear panel of the projector.
Power to the external connected device is off.
The video signal format of the video equipment is not set correctly.
No picture
Picture adjustments are incorrectly set.
Color is faded
Adjust the focus
The projection distance exceeds the focus range.
Picture is blurred
(Component/VGA input only)
Perform "Fine Sync" adjustments ("Clock" adjustment) also in component
Perform "Fine Sync" adjustments ("Phase adjustment) also in component
Picture noise appears.
Change the input signal type of the video equipment.
Picture is green on | Appendix |
INPUT1 COMPONENT |
|
62
