Electronic clock /electronic alarm

ELECTRONIC CLOCK (fig. 4.1)

The electronic alarm is a device which groups the functions of 12 hours clock with illu- minated display and 10 hours alarm.

Upon immediate connection of the range or after a blackout, 12•00 will flash on the dis- play.

To set the hour it is necessary to push the button and then, within 7 seconds, the

or button until you have set the exact hour.

An energy black-out makes the clock go to zero.

SET TIME OF DAY

Push button and then, within 7 seconds, the or button until you have set the exact hour. This function remains activated 7 seconds after the last pushing of or button.

Change the hours only: press the button for 4 seconds until the hours display will flash.

Change the hours only by pushing the or button. The minutes and hidden sec- onds will not be affected.

Fig. 4.1

ELECTRONIC ALARM

The alarm program consists only of a buzzer which may be set for a maximum period of 10 hours.

To set the time, push the or button until you obtain the desired time in the dis- play.

From 0•10 to 99•50 you read the time in minutes and seconds (10 seconds step); then from 1•40 to 10•00 you read the time in hours and minutes (minutes step).

Having finished the setting, the symbol will be lighted and the countdown will start immediately.

During countdown the timer has priority in the display. To show the time of day press

button. At the end of the time, the symbol will be switched off and an intermittent buzzer, during 7 minutes, will go off; this can be stopped by pressing the button. The signal will be skipped if button is pressed during the last 15 seconds of the timer.

To stop the alarm countdown in any moment keep the button pressed until you read 0•00 on the display (symbol switches off).

IMPORTANT WARNING: THIS IS ONLY AN ELECTRONIC ALARM. REMEMBER TO TURN OFF THE OVEN OR BROIL MANUALLY AT THE END OF COUNTDOWN.

SETTING THE FREQUENCY OF THE ALARM SOUND

The selection from 3 possibilities of sound can be made by pressing the button.