Verona VEGCT424F warranty GAS Connection Specification, Gasket

Page 14

GAS CONNECTION SPECIFICATION

	G1/2”cylindrical	228(ISO-1) male	Gasket
Elbow	G1/2”cylindrical	228(ISO-1) male	G1/2”cylindrical 228(ISO-1) female
connection

1/2” G cylindrical
(ISO 228-1) male
Gasket	1/2” G cylindrical
	(ISO 228-1) female
Extensioni n
pipe female
pipe fittingi g
	Extension
	pipe
Extension
pipe male	1/2” G cylindrical
pipe fitting	(ISO 228-1) male

	Gasket	1/2” G cylindrical
		(ISO 228-1) female
	3/8” NPT (conical)	Connector
	male	Connector
	male
		3/8” NPT
		female

Pressure regulator

3/8” NPT female

Manifold female pipe fitting

Cooktop

manifold

To cooktop

Manifold

test point

pressure

1/8” NPT

To mains

connection

Arrow

	WARNING: check the right positioning
	of the gas regulator. The arrow on the
	back of the gas regulator must be
14	oriented toward the connector.	Fig. 5.3
		Fig. 5.3

Image 14

Contents Model VEGCT424F Dear Customer Important Precautions and Recommendations Tips for the UserFeatures Cooking PointsChoice of Burner fig Using the gas cooktopGAS Burners Cleaning and maintenance Correct Replacement of the Burners Correct Position of Triple Ring BurnerInstallation Instructions Tools Needed for InstallationReplacement Parts Electrical Grounding InstructionsInstallation to the cabinet Cooktop DimensionsProximity to Side Cabinets Fastening the Cooktop .3Manual Shut-off Valve fig Gas connectionExplosion Hazard Pressure Regulator Installation Step GAS Connection Specification GasketFlexible Connections Screw Manifold Test point Pressure NPT UnscrewRigid Pipe Connections Leak TestingSetting the Pressure Regulator fig Conversion to LP/PROPANE GASInjectors Table Operations to be Performed When Substituting the InjectorsRegulating the Burner Minimum Setting Electrical connection Recommended ground methodWiring Diagram Caca CA CA Wiring diagram keyCod -ß1