Verona VEGCT424F warranty Pressure Regulator Installation Step

PRESSURE REGULATOR INSTALLATION

STEP 1

UNLOCK

The elbow connection can be turned in the direction required after the manifold female pipe fitting has been slackened by using a wrench.

Then tighten the elbow-manifold female pipe fitting connection by using a wrench before proceeding with gas connection.

When tightening keep the elbow connection firm i.e. by using an adjustable pliers or an adjustable wrench (pay attention not to damage the thread).

To cooktop

LOCK Fig. 5.2a

STEP 2

Mount the extension pipe to the elbow connection interposing the gasket supplied and tighten by using a wrench.

When tightening keep the elbow connection firm i.e. by using an adjustable pliers or an adjustable wrench (pay attention not to damage the thread).

To cooktop

LOCK

Fig. 5.2b

LOCK

STEP 3

Mount the 3/8” NPT (conical) male connector to the pressure regulator and tighten by using a wrench.

Do not over tighten the connector. Over tightening may crack regulator.

Arrow

Fig. 5.2c

STEP 4

Assemble the 3/8” NPT connector + pressure regulator group to the extension pipe interposing the gasket supplied.

IMPORTANT: use two spanners to tighten the connection.

Fig. 5.2d 13