Installation of Sloped Enclosure If Ordered

INFRARED CHEESE MELTER

INSTALLATION

CAUTION

ALL PIPE JOINTS AND CONNECTIONS MUST BE TESTED THOROUGHLY FOR GAS LEAKS. USE ONLY SOAPY WATER FOR TESTING ON ALL GASES. NEVER USE AN OPEN FLAME TO CHECK FOR GAS LEAKS. ALL CONNECTIONS MUST BE CHECKED FOR LEAKS AFTER THE CHEESE MELTER HAS BEEN PUT INTO OPERATION. TEST PRESSURE SHOULD NOT EXCEED 14" W.C. (3.47 kPa).

1.Check that the control valves on the cheese melter are in the OFF position.

2.Purge the gas supply line to clean out dust, dirt, or other foreign matter before connecting the line to the cheese melter.

3.For wall-mount and countertop models, connect the gas supply to the inlet at right rear corner using the external regulator shipped with the unit.

4.For flue-riser mounted installation, use the supplied regulator. Connect gas supply from cheese melter, which extends through a hole on the rear of the riser, to the rear tailpipe of the oven base.

5.Turn on the gas and check for leaks using soapy water.

STEP 4: INSTALL SLOPED ENCLOSURE (OPTIONAL ACCESSORY)

To install a sloped enclosure, remove the body-side screws and discard. Remove three screws on the bottom, toward the rear of the unit. Position the hanger clip and fasten with three screws. Remove three screws in the bottom of the face plate. Slide the enclosure so that the bracket inserts into the hanger clip. Align the holes in the front of the enclosure with the holes in the bottom of the face plate. Fasten with three screws.

Figure 7

Installation of Sloped Enclosure (If Ordered)

OWNER’S MANUAL 1186531 REV 2 (09/11)

PAGE 17 OF 24

P24-CM specifications

The Southbend P24-CM is a premier commercial gas range designed to meet the demanding needs of professional kitchens. This range is celebrated for its robust construction, thoughtful design features, and efficient cooking capabilities, making it a favorite among chefs and cooks in various culinary settings.

One of the standout features of the P24-CM is its powerful burner system. It comes with four open burners that provide precise temperature control. Each burner is capable of generating up to 30,000 BTUs, allowing chefs to quickly boil, sauté, or simmer food as needed. This versatility is essential in a busy kitchen where time is of the essence.

The P24-CM is constructed from stainless steel, ensuring durability and resistance to the wear and tear of a bustling culinary environment. The stainless steel finish not only enhances the range's aesthetic appeal but also makes it easy to clean and maintain. Its modular design means it can fit seamlessly with other kitchen equipment and promote a more efficient workspace.

Another key feature of the Southbend P24-CM is its 24-inch depth, providing a compact solution for kitchens with limited space. Despite its smaller footprint, this range does not compromise on performance or functionality. The integrated grease tray and removable drip tray streamline the cooking process by simplifying cleanup, ensuring that chefs can focus on their culinary creations rather than maintenance.

The Southbend P24-CM also features a cast iron griddle option, which adds versatility in cooking methods. This heavy-duty griddle allows for evenly distributed heat, making it ideal for cooking a variety of foods, from pancakes to sautéed vegetables. Moreover, the range comes equipped with a heavy-duty oven that operates with an adjustable thermostat, providing consistent baking and roasting results.

The ignition system on the P24-CM is designed for safety and ease of use. It features a pilotless ignition that starts with just the push of a button, minimizing the risk of gas leaks and providing a quick start-up for busy kitchen operations.

In summary, the Southbend P24-CM is an exceptional gas range that combines power, durability, and space efficiency. With its high BTU burners, robust construction, and innovative features, it is tailored to meet the rigorous demands of professional kitchens while offering chefs the tools they need to create culinary masterpieces.