Heartland Bakeware 9200/7200 manual Nickel-Plated Trim, Oven and Cabinet Light Replacement

Page 26

Nickel-Plated Trim

Nickel must be cleaned with warm soapy water and a mirco cloth. If any acid-based food or liquid, such as lemon juice or tomato juice, is spilled on the range, wipe it at once to prevent staining.

Exhaust Hood

Exhaust filters are included with your exhaust hood. The filters may be cleaned periodically in soapy water. The filters should be replaced every 4 months or when they begin to restrict air flow. Extras are available from your dealer or directly from Aga-Heartland. Please order four or more at one time to save freight and handling charges.

See instructions for ordering on page 9 under " EXHAUST HOOD "

The inside of your exhaust hood should be inspected periodically for grease buildup (a fire hazard) and cleaned as required with soap and water.

Oven and Cabinet Light Replacement

Before replacing lamp, disconnect the power at the main fuse or circuit breaker panel. When replacing light bulbs, wait until the oven and bulb are cool. Remove oven light lens by simply unscrewing it counterclockwise. The bulb can then be unscrewed easily. Always handle the bulb with a dry (never wet) cloth to protect hands. If light bulb should break, disconnect power to range by unplugging it or removing the fuse from the panel before touching the bulb. Replace the bulb. Use only a 40 watt oven bulb available at your local hardware store or appliance dealer.

When cleaning the oven, do not touch lens with a wet cloth.

WARNING!

Do not sit, lean, lift or stand on the doors or drawers of this range as possible injuries may result.

26

Image 26
Contents REV Installation and Operating InstructionsModel 9200 Model For Your Safety When moving range for service or cleaningWhat to do if YOU Smell GAS Gas Models 9200/7200 Table of Contents Assembly of Exhaust Hood to Range Positioning the RangeElectrical Installation Exhaust Hood Electrical ConnectionTools required to install vented hood Ventless InstallationVented Installation, Tools, Material, and Dimensions Exhaust HoodInstallation through an attic to an outside wall Installation of DuctingInstallation through an outside wall ModelVenting Safety Guidelines Gas Line InstallationSafety How to StepsAppliances installed in the state of Massachusetts ModelModel Dimensions Rough MeasurementsAppliances Rough 47-1/2 101 cm 121 cmOven Safety Important Safety InstructionsExhaust Hood Safety Sealed Burner Features see fig Cooking ControlsOven Features Other Features see figControl Panel Layout Model Control PanelTop Burner Operation Lighting the Top BurnersRange Thermostat Oven CookingOven Lighting BroilManually Lighting the Oven Burner Power Failure OperationManually Lighting the Top Burners Reset minute minder Clock / TimerFunctions Power on SignalBroiling Guide Cooking GuideMeat Roasting Guide Baking GuideCare and Cleaning Porcelain Keeping it cleanOven Cleaning Surface BurnersOven and Cabinet Light Replacement Nickel-Plated TrimInterior Oven Rack Rack SupportsRemoval of Oven Door Broiling Broiling PanSetup and Troubleshooting Burner Setup & AdjustmentAir Shutter Adjustment oven burner only Oven Burner AssemblyProblem Cause Remedy Spark Ignition Oven BurnerConversion Kits and Information Products See our complete line of kitchen appliances Model7200/9200 Parts Diagram Model 7200/9200 Range Parts List Model 7200/9200 Wiring Diagrams Technical Data