Eurotech Appliances EDW242C, EDW274E, EDW254E owner manual Eng, Model EDW294E Operating Instructions

Page 25

MODEL EDW294E OPERATING INSTRUCTIONS

CONTROL PANEL

Indicator

LISH

Programs

LCD Window

Lights

ENG

On/Off

Program

Option

Start

Button

Button

Button

Buttons

 

 

 

ON/OFF BUTTON

Press this button to turn on the power to the machine. The power must be on before you can select the program and options.

LCD WINDOW

The LCD displays programs, delay start hours, and program run times. It also displays error codes (see page 31).

PROGRAM BUTTON

Press the program button until the number for the program you wish to select displays (e.g., P1, P2, etc.). The program numbers correlate to the order in which the programs are shown on the control panel, starting on the left (Soak and Hold).

OPTION BUTTONS

Please note that you must select the options after you’ve selected the wash program and before you start the dishwasher.

Delay Start

You can delay starting the program from 1 to 16 hours. Press this button until the number of hours you wish to delay starting the program displays on the LCD. The small light above this button will glow to indicate that you have selected this option.

Top Load

This option is designed to save water and energy by allowing your to wash only the top or bottom basket. The indicator light above this button will glow when this option is selected. (This option is not available with the Soak and Hold program.)

Press the Top Load button once to wash the top basket only. The LCD will display two bars across the top to indicate the top basket wash has been selected.

To wash the bottom basket only, press this button twice. The LCD will display two bars across the bottom to indicate the bottom basket wash has been selected.

No Prewash

This option lets you turn off the prewash cycle and is only available for programs with a prewash, i.e., Pots

&Pans and Heavy Wash. The indicator light above this button will glow to indicate that you have selected this option.

Dry Time

This button overrides the automatic drying time for the program you select and lets you specify the length of time to fan dry the dishes. The indicator light above this button will glow when you have selected this option.

Your options are 0, 20, 35, or 45 minutes. (The factory-set drying time is 20 minutes.) The following defines what the LCD codes for this option are:

A0

= no dry

A2 = 35 minutes

A1

= 20 minutes

A3 = 45 minutes

START BUTTON

Once you have selected a program and options, press this button and close the door to start the dishwasher. A signal will sound to indicate the program has begun and the LCD will display the estimated program run time.

If you stop a program in progress by opening the door, you will need to press the Start/Stop button again to restart the program from the interrupted point.

INDICATOR LIGHTS

The On light indicates that the power to the unit is on. The Rinse Aid light glows when you need to add rinse aid. (See page 20 for instructions on how to load the rinse aid dispenser.)

ADDING AN ITEM

WARNING!

Be extremely careful when opening the door during a program. The water is hot and you could get scalded.

To add an item after a program has started, open the door slightly until the spray arms stop turning. You can then open the door fully and place the item into the dishwasher. Close the door and press the Start button to restart the program from where it stopped.

25

Image 25
Contents English A NÇA I S Contents Child Safety Tips Important Safety InstructionsPOISON1 Dishwasher Dimensions Dishwasher FeaturesModels EDW242C, EDW254E, EDW274E Model EDW294EWhat YOU Need Installation InstructionsMaterials Supplied with Unit ToolsInstalling the TOP Fill Strip on Model EDW294E Cabinet Opening DimensionsMoisture Barrier MeasurementsMoving the Machine Into Place Adjusting the Leveling LegsOpening the EDW294E Custom Door Standard Cabinet Installations Installing the TOE KickSolid Surface Counter TOP Installations EDW294E with a TOP Fill Strip InstallationsEasy Connection Technical DataWater Supply Important Things to Know about Drain Connections Drain ConnectionsGrounding Instructions Electrical ConnectionsTesting for Leaks Connecting AN Electric CableFitting the EDW294E ONE-PIECE Custom Door Panel Installing the ONE-PIECE Custom Door PanelItems Provided with the ONE-PIECE Door Panels Fasten the dishwasher to the cabinet seeBuilding a Custom Wood Door Panel for Model EDW294E Custom Wood Panel DimensionsCustom Wood Panels That Extend to the Cabinet TOP 30-1/16 Wood Panels the Same Height AS the Dishwasher Door 23-1/4 Installing a Custom Wood PanelLoading the Dishwasher Adjusting the Upper BasketLoading the Upper Basket Loading the Cutlery Basket Loading the Lower BasketCutlery Caddy Type of Detergent to USE Detergent DispenserAmount of Detergent to USE Soft Recommended Detergent Amounts Based on Water HardnessMedium HardWhen to Refill the Rinse AID Dispenser Adjusting the Amount of Rinse AID DispensedRinse AID Indicator Light Rinse AID DispenserEDW242C Programs Model EDW242C Operating InstructionsControl Panel Model EDW254E Operating InstructionsEDW254E Programs Model EDW274E Operating InstructionsWash Rinse Program Adding AN Item EDW274E ProgramsWash Wash Temp Rinse Temp Program Recommended Loads Model EDW294E Operating Instructions ENGProgram Recommended Loads EDW294E ProgramsCleaning the Filters Care and MaintenanceCleaning the Spray Arms Cleaning the DoorOverfill Protection Cleaning the Water Inlet FilterPoor washing performance Solutions to Common Dishwashing ProblemsEtching TroubleshootingError Messages on Models EDW242C Error Messages on Models EDW254E, EDW274E, and EDW294EMaterial Safe Information and Recommendations Washing Special ItemsProduct Warranty EDW242C EDW254E EDW274E EDW294E IndexISH